u-boot.git/doc/device-tree-bindings, branch v2018.09-rc2

dt-bindings: Document STM32 ADC DT bindings

2018-08-03T23:53:10Z

This patch adds documentation of device tree bindings for the STM32 ADC. It's based on linux-v4.18-rc* dt-bindings, at the time of writing: - Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt Signed-off-by: Fabrice Gasnier Reviewed-by: Simon Glass

CREG GPIO: add device tree bindings

2018-07-31T04:49:47Z

Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

doc: Move device tree bindings documentation to doc/device-tree-bindings

2018-07-24T13:25:23Z

Currently the U-Boot project contains 2 documentation directories: - doc/ - Documentation/ The Documentation directory only contains device tree bindings related content, so move the 3 files to doc/device-tree-bindings/. Signed-off-by: Breno Lima

spl: document 'chosen/u-boot, spl-boot-device'

2018-07-20T23:55:26Z

To let the full U-Boot know where it was booted from (i.e. which of the entries in /chosen/u-boot,spl-boot-order' contained a valid image), we define (and document) /chosen/u-boot,spl-boot-device as the property that could/should automatically be injected by SPL. This commit only contains a documentation change, which documents the new property and the intended usage. Signed-off-by: Philipp Tomsich Tested-by: Klaus Goger

stm32mp1: clk: support digital bypass

2018-07-20T19:55:07Z

HSE and LSE bypass shall support both analog and digital signals. This patch add a way to select digital bypas case in the device tree and set the associated bit DIGBYP in RCC_BDCR and RCC_OCEN register during clock tree initialization. Signed-off-by: Patrick Delaunay

fdt: Add device tree memory bindings

2018-07-09T15:11:00Z

Support a default memory bank, specified in reg, as well as board-specific memory banks in subtree board-id nodes. This allows memory information to be provided in the device tree, rather than hard-coded in, which will make it simpler to handle similar devices with different memory banks, as the board-id values or masks can be used to match devices. Signed-off-by: Michael Pratt Signed-off-by: Simon Glass Reviewed-by: Vadim Bendebury

x86: irq: Support discrete PIRQ routing registers via device tree

2018-06-13T01:50:57Z

Currently both pirq_reg_to_linkno() and pirq_linkno_to_reg() assume consecutive PIRQ routing control registers. But this is not always the case on some platforms. Introduce a new device tree property intel,pirq-regmap to describe how the PIRQ routing register offset is mapped to the link number and adjust the irq router driver to utilize the mapping. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

2018-06-04T12:55:00Z

mvebu: pinctrl: sync compatible string with Linux 4.17-rc4

2018-05-29T06:33:05Z

For pinctrl driver of mvebu, the compatible strings supported are defined differently from Linux version. The patch aligned the compatible string with Linux 4.17-rc4. Signed-off-by: Evan Wang Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese

device-tree-bindings: phy: Sync sun4i-usb-phy bindings

2018-05-28T11:10:43Z

Sync sun4i-usb-phy bindings from Linux, since the drivers/phy/allwinner/phy-sun4i-usb.c follow similar. Sync changes from Linux with below commit: "phy: sun4i-usb: add support for R40 USB PHY" (sha1: f3d96f8d23d8e6d0b7642ee946b9b2ac3418fb4d) Signed-off-by: Jagan Teki Acked-by: Jun Nie