u-boot.git/doc/device-tree-bindings, branch v2021.01 Unnamed repository; edit this file 'description' to name the repository. spi: dw: Document devicetree binding 2020-12-18T10:46:37+00:00 Sean Anderson seanga2@gmail.com 2020-10-16T22:57:52+00:00 0d98f6de62dc02cbdbf0a40bdb02e465256e2150 This documentation has been taken from Linux commit 3d7db0f11c7a ("spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config"), immediately before the file was deleted and replaced with a yaml version. Additional compatible strings from newer versions have been added, as well as a few U-Boot-specific ones. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> 
This documentation has been taken from Linux commit 3d7db0f11c7a ("spi: dw:
Refactor mid_spi_dma_setup() to separate DMA and IRQ config"), immediately
before the file was deleted and replaced with a yaml version. Additional
compatible strings from newer versions have been added, as well as a few
U-Boot-specific ones.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off 2020-11-25T11:02:58+00:00 Patrick Delaunay patrick.delaunay@st.com 2020-10-15T12:50:57+00:00 c4801389588c9ed49222e6f0615de9879d445f9c This patch adds support for optional vbus regulator. It is managed on phy_power_on/off calls and may be needed for host mode. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> 
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
pinctrl: k210: Rename power domains to match datasheet 2020-11-17T07:09:28+00:00 Sean Anderson seanga2@gmail.com 2020-11-13T13:43:40+00:00 6e35c1cb12e7be136baf9f44249baa3279ed7b5c This renames power domains to match the names on the k210 datasheet. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com> 
This renames power domains to match the names on the k210 datasheet.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: Rick Chen <rick@andestech.com>
smbios: Add documentation and devicetree binding 2020-11-06T02:18:20+00:00 Simon Glass sjg@chromium.org 2020-11-05T13:32:10+00:00 f96965315489fcb7fc9df8fe4da0137150bb3826 Add information about how to set SMBIOS properties using the devicetree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add information about how to set SMBIOS properties using the devicetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
doc: Add a binding for sysinfo 2020-11-06T02:18:20+00:00 Simon Glass sjg@chromium.org 2020-11-05T13:32:06+00:00 49337238effdd86e5863b14a52c1ecc08867bb01 Add a simple binding file for this, so that it is clear what this binding directory is for. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add a simple binding file for this, so that it is clear what this binding
directory is for.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
board: Rename uclass to sysinfo 2020-11-06T02:18:20+00:00 Simon Glass sjg@chromium.org 2020-11-05T13:32:05+00:00 3a8ee3df836614b68881f5b84d3197305ee1b08e This uclass is intended to provide a way to obtain information about a U-Boot board. But the concept of a U-Boot 'board' is the whole system, not just one circuit board, meaning that 'board' is something of a misnomer for this uclass. In addition, the name 'board' is a bit overused in U-Boot and we want to use the same uclass to provide SMBIOS information. The obvious name is 'system' but that is so vague as to be meaningless. Use 'sysinfo' instead, since this uclass is aimed at providing information on the system. Rename everything accordingly. Note: Due to the patch delta caused by the symbol renames, this patch shows some renamed files as being deleted in one place and created in another. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.

In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.

The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.

Rename everything accordingly.

Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
spi: Add Qualcomm QUP SPI controller driver 2020-10-22T13:54:54+00:00 Robert Marko robert.marko@sartura.hr 2020-10-08T20:05:09+00:00 367ea426a51886f6815e520f8b75a010cfa1bdfb This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> 
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s.

Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW.
FIFO and Block modes are supported, no support for DMA mode is planned.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD 2020-10-19T22:49:05+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2020-10-14T07:08:26+00:00 78fe97b96eef0dc2c4bf16adb427242611e1f813 Add dt-binding for MediaTek USB3 DRD Driver which it's ported from the Linux kernel DTS binding: Documentation/devicetree/bindings/usb/mediatek,mtu3.txt Commit ID: 34d0545978b6 ("dt-bindings: usb: mtu3: fix typo of DMA clock name") Due to Dual-Role switch is not supported in Uboot, some properties are removed or changed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add dt-binding for MediaTek USB3 DRD Driver which it's ported
from the Linux kernel DTS binding:
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
Commit ID:
34d0545978b6 ("dt-bindings: usb: mtu3: fix typo of DMA clock name")

Due to Dual-Role switch is not supported in Uboot, some properties
are removed or changed.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
dt-binding: usb: add bindings for some common properties 2020-10-19T22:49:05+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2020-10-14T07:08:25+00:00 8faef3c756efb9ce924dce968ffddb0416208036 Add bindings for common properties, include maximum-speed, dr_mode and phy_type Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add bindings for common properties, include maximum-speed,
dr_mode and phy_type

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
pinctrl: Add support for Kendryte K210 FPIOA 2020-10-08T15:42:36+00:00 Sean Anderson seanga2@gmail.com 2020-09-14T15:01:58+00:00 7224d5ccf8e1d2552e2994c5d55769c334231c08 The Fully-Programmable Input/Output Array (FPIOA) device controls pin multiplexing on the K210. The FPIOA can remap any supported function to any multifunctional IO pin. It can also perform basic GPIO functions, such as reading the current value of a pin. However, GPIO functionality remains largely unimplemented (in favor of the dedicated GPIO peripherals). Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
The Fully-Programmable Input/Output Array (FPIOA) device controls pin
multiplexing on the K210. The FPIOA can remap any supported function to any
multifunctional IO pin. It can also perform basic GPIO functions, such as
reading the current value of a pin. However, GPIO functionality remains
largely unimplemented (in favor of the dedicated GPIO peripherals).

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>