u-boot.git/doc/mvebu, branch master

cmd: mvebu/bubt: Add support for reading image from the SATA disk partition

2023-03-01T05:39:17+00:00

This change allows to load boot image from the first SATA/SCSI device
partition and burn it to board boot location (e.g. SPI-NOR). This is
particularly when storage device is not handled by U-Boot as USB mass
storage (which is already supported by bubt) but as SATA/SCSI device.

Signed-off-by: Pali Rohár

cmd: mvebu/bubt: Add support for writing image to SATA disk

2023-03-01T05:39:17+00:00

All 32-bit Armada SoCs and also 64-bit Armada 3720 SoC can load and boot
firmware from SATA disk. This adds support for updating firmware binary for
these SoCs. On 32-bit Armada SoC is firmware stored at sector 1 and on
Armada 3720 is stored at MBR partition 0x4d or GPT partition with type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE (Marvell Armada 3700 Boot partition).

Signed-off-by: Pali Rohár

cmd: mvebu/bubt: Add support for selecting eMMC HW partition

2023-03-01T05:39:17+00:00

Support for burning into the correct eMMC HW boot partition was broken and
removed in commit 96be2f072768 ("mvebu: bubt: Drop dead code"). Reimplement
this functionality and bring it back again.

Fixes: 96be2f072768 ("mvebu: bubt: Drop dead code")
Signed-off-by: Pali Rohár

WS cleanup: remove trailing empty lines

2021-09-30T12:08:56+00:00

Signed-off-by: Wolfgang Denk

doc: cmd: bubt: drop duplicated text

2018-06-12T22:44:00+00:00

This commit removes text that is exact duplicated of the text above.

Cc: Konstantin Porotchkin 
Signed-off-by: Baruch Siach 
Reviewed-by: Stefan Roese

arm64: mvebu: Fix A8K memory mapping and add documentation

2016-12-21T08:52:35+00:00

Fix the MMU mapping for A8K device family:
 - Separate A7K and A8K memory mappings
 - Fix memory regions by including IO mapping for all
   3 PCIe interfaces existing on each connected CP110 controller
Add A8K memory mapping documentation with all regions
configured by Marvell ATF.

Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6
Signed-off-by: Konstantin Porotchkin 
Signed-off-by: Stefan Roese 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa

arm64: mvebu: Add bubt command for flash image burn

2016-12-12T08:04:52+00:00

Add support for mvebu bubt command for flash image
load, check and burn on boot device.

Signed-off-by: Konstantin Porotchkin 
Reviewed-by: Stefan Roese 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa 
Signed-off-by: Stefan Roese