This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.

CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776

Highlights:

  *
    SPL / MMC:
      o
        Fix Kconfig handling for
        SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
      o
        Correct raw sector calculations and respect explicit sector values
        when loading U-Boot from MMC in SPL
      o
        Adjust raw MMC loading logic for SoCFPGA platforms
  *
    EFI boot:
      o
        Permit EFI booting on SoCFPGA platforms
      o
        Disable mkeficapsule tool build for Arria 10 where unsupported
  *
    Agilex5:
      o
        Upgrade SDHCI controller from SD4HC to SD6HC
      o
        Enable MMC and Cadence SDHCI support in defconfig
      o
        Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
      o
        Revert incorrect GPIO configuration for SDIO_SEL
      o
        Refine U-Boot DT handling for SD and eMMC boot variants
  *
    SPI:
      o
        Allow disabling the DesignWare SPI driver in SPL via Kconfig
  *
    Board / configuration fixes:
      o
        Enable random MAC address generation for Cyclone V
      o
        Fix DE0-Nano-SoC boot configuration
      o
        Remove obsolete or conflicting options from multiple legacy
        SoCFPGA defconfigs

Signed-off-by: Jonathan GUILLOT <jonathan@joggee.fr>
Fixes: ff6ef4b9093f ("doc: man-page for the part command")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

This is a natural buddy to the existing "part number", allowing one to
get the partition name for a given partition number.

Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Acked-by: Quentin Schuloz <quentin.schulz@cherry.de>
Tested-by: Anshul Dalal <anshuld@ti.com>

For nearly all commands in U-Boot the '?' variable is handled the same
way with 0 meaning success, 1 meaning any failure.  Explain this in the
general rules section of the cmdline documentation (with a link to a
counter example) and then remove the redundant wording from most
commands. We retain a section about the return value in a number of
places where we are doing something such as always returning a specific
value or we have useful additional information to go along with the
normal return codes.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

fix typo from "commnad" to "command"

Signed-off-by: Aristo Chen <aristo.chen@canonical.com>

%s/Synopis/Synopsis/g

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Add the description of CLI commands to the generated index.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.

Add some missing empty lines after titles.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.

Provide a way to manually set the partition-table type, avoiding the
auto-detection process.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

This implements the following command:

    part type mmc 0:1
      -> print partition type UUID
    part type mmc 0:1 uuid
      -> set environment variable to partition type UUID

"part type" can be useful when writing a bootcmd which searches for a
specific partition type to enable automatic discovery of partitions and
their intended usage or mount point.

Signed-off-by: Enric Balletbo i Serra <eballetbo@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Fix when CONFIG_PARTITION_TYPE_GUID is disabled and have the
command check for "types" before "type"]
Signed-off-by: Tom Rini <trini@konsulko.com>