u-boot.git/doc/usage/cmd/seama.rst, branch master Unnamed repository; edit this file 'description' to name the repository. doc: seama: Reword return value section 2025-10-26T15:03:36+00:00 Tom Rini trini@konsulko.com 2025-10-24T16:02:59+00:00 dbdf60b7aa80d9370a8710137843380393786f09 With the addition of general text about how the return value is handled, reference that while retaining the additional information about setting $seama_image_size Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Tom Rini <trini@konsulko.com> 
With the addition of general text about how the return value is handled,
reference that while retaining the additional information about setting
$seama_image_size

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
doc: create index entries for commands 2024-01-17T07:40:19+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2024-01-14T13:53:13+00:00 60971e63e60b36203a5e3cb30deaa05dbd276f82 Add the description of CLI commands to the generated index. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
Add the description of CLI commands to the generated index.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
cmd: Add a SEAMA image load command 2023-02-06T22:10:15+00:00 Linus Walleij linus.walleij@linaro.org 2023-01-31T23:16:13+00:00 41a29f284cef48a86c86d038c0cd8cc1c851417e Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.

This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.

This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.

The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.

A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>