u-boot.git/doc/usage, branch v2022.01 Unnamed repository; edit this file 'description' to name the repository. doc: usage: Fix command in fdt overlay apply sequence 2021-12-09T19:43:25+00:00 Alexander Dahl ada@thorsis.com 2021-12-03T14:46:57+00:00 446266b024c971a6afa4eb256b2995a245d4eb49 Literally adhering to the docs gave this wrong output: U-Boot> setenv fdtaddr 0x87f00000 U-Boot> fdtaddr $fdtaddr Unknown command 'fdtaddr' - try 'help' Fixes: d80162cfc559 ("doc: Document how to apply fdt overlays") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Literally adhering to the docs gave this wrong output:

    U-Boot> setenv fdtaddr 0x87f00000
    U-Boot> fdtaddr $fdtaddr
    Unknown command 'fdtaddr' - try 'help'

Fixes: d80162cfc559 ("doc: Document how to apply fdt overlays")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
doc: mmc rescan speed mode 2021-11-07T17:36:55+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2021-11-05T15:35:44+00:00 212f078496e4b9df0794fd4f56e0ab342b7efbf9 Provide human readable descriptions of the speed nodes instead of the name of constants from the code. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
Provide human readable descriptions of the speed nodes instead of the name
of constants from the code.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Merge tag 'v2021.10-rc4' into next 2021-09-16T14:29:40+00:00 Tom Rini trini@konsulko.com 2021-09-16T14:29:40+00:00 6674edaabfd271471608146806f5b6540bc76a1b Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt 
Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
doc: usage: mmc: Document usage of speed mode in "mmc dev" and "mmc rescan" 2021-09-10T10:17:23+00:00 Aswath Govindraju a-govindraju@ti.com 2021-08-13T17:34:42+00:00 b817959bd4cc90c1f6405547a2a6c242b3a4b731 Add documentation on the usage of "mmc dev" and "mmc rescan" commands to set user defined speed modes. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> 
Add documentation on the usage of "mmc dev" and "mmc rescan" commands to
set user defined speed modes.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDR 2021-08-31T21:46:37+00:00 Tom Rini trini@konsulko.com 2021-08-23T14:25:29+00:00 2f45b3041e8431f3e2007d521a570daa4cb95a8e All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define
CONFIG_LOADADDR.  Very very rarely are these not the same address, and
qemu-ppce500 is one such case.  However, based on reading the history of
the code, this mismatched value was simply a copy-paste from other
PowerPC platforms where it is this unused currently.  Switch the code to
use CONFIG_SYS_LOAD_ADDR and update the documentation.

Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
lib: Allow using 0x when a decimal value is requested 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:38+00:00 e6951139c0544116330b12e287fe45e30bbab11c U-Boot mostly uses hex for value input, largely because addresses are much easier to understand in hex. But in some cases a decimal value is requested, such as where the value is small or hex does not make sense in the context. In these cases it is sometimes useful to be able to provide a hex value in any case, if only to resolve any ambiguity. Add this functionality, for increased flexibility. Signed-off-by: Simon Glass <sjg@chromium.org> 
U-Boot mostly uses hex for value input, largely because addresses are much
easier to understand in hex.

But in some cases a decimal value is requested, such as where the value is
small or hex does not make sense in the context. In these cases it is
sometimes useful to be able to provide a hex value in any case, if only to
resolve any ambiguity.

Add this functionality, for increased flexibility.

Signed-off-by: Simon Glass <sjg@chromium.org>
doc: Add a note about number representation 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:37+00:00 5f4b356121fdb520e4c9bb4fe3483c1a5f93439c Mention the default base of U-Boot in the command-line section. Add examples for decimal and octal. Signed-off-by: Simon Glass <sjg@chromium.org> 
Mention the default base of U-Boot in the command-line section. Add
examples for decimal and octal.

Signed-off-by: Simon Glass <sjg@chromium.org>
doc: Convert command-line info to rST 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:36+00:00 7a4ff7c41bab8b43767eacc0b30ca1573ab6acb1 Take this part of the README and put it into rST format. Signed-off-by: Simon Glass <sjg@chromium.org> 
Take this part of the README and put it into rST format.

Signed-off-by: Simon Glass <sjg@chromium.org>
doc: usage: add description for setexpr command 2021-07-27T18:50:47+00:00 Roland Gaudig roland.gaudig@weidmueller.com 2021-07-23T12:29:22+00:00 236d39bd10bd94545c5b0283ebc0999ddfd82344 Add usage for the setexpr command. It has been added to describe mainly the new setexpr format string operation. Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Add usage for the setexpr command. It has been added to describe
mainly the new setexpr format string operation.

Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
doc/usage: cmd-usage help file for askenv 2021-06-28T17:57:13+00:00 Adarsh Babu Kalepalli opensource.kab@gmail.com 2021-06-11T14:15:11+00:00 a86ed41bff94f90af2e1a8798e20920ef0353e97 help file for using askenv cmd is created. It provides description on the command purpose, description of arguments, couple of examples (illustrating command usage), configuration parameter and possible return values. Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com> Add missing entry in doc/usage/index.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
help file for using askenv cmd is created.
It provides description on the command purpose,
description of arguments,
couple of examples (illustrating command usage),
configuration parameter and
possible return values.

Signed-off-by: Adarsh Babu Kalepalli <opensource.kab@gmail.com>
Add missing entry in doc/usage/index.rst.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>