This is mostly hidden in the background, but it is sometimes useful to
look at it. Add a function to allow this.

Signed-off-by: Simon Glass <sjg@chromium.org>

This command has a few small features, so document it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.

Signed-off-by: Simon Glass <sjg@chromium.org>

Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.

With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update the cbsysinfo command to show the contents of the CMOS option
table.

While we are here, add some example output for this command, along with
mention of what the unimplemented tags are.

Signed-off-by: Simon Glass <sjg@chromium.org>

CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/22993

- New boards:
        rk3566: Hardkernel ODROID-M1S
        rk3588s: Hardkernel ODROID-M2
        rk3588: NanoPC-T6 LTS
- Migrate to use USB_DWC3_GENERIC for rk3328
- Other board level config and dts update

Increase rng-seed size to make Linux happy and initialize rng pool instantly.
Linux 5.19+ requires 32 bytes of entropy to initialize random pool, but u-boot
currently provides only 8 bytes.
Linux 5.18 and probably some versions before it used to require 64 bytes.
Bump min value to 64 bytes to be on a safe side.

Boot with 8 byte rng-seed (Linux 6.11):
    # dmesg | grep crng
    [   12.089286] random: crng init done
Boot with 32 byte rng-seed (Linux 6.11):
    # dmesg | grep crng
    [    0.000000] random: crng init done

Linux source references:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.19#n551
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.18#n236

Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
Fixes: d2048bafae40 ("rockchip: board: Add board_rng_seed() for all Rockchip devices")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c

Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.

Signed-off-by: Simon Glass <sjg@chromium.org>

Pull request efi-2025-01-rc1-2

CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/22810

Documentation:

* Add document describing Ethernet boot on AM62x SoC
* Fix typo in blkmap command example

UEFI:

* Avoid #ifdef in efi_setup.c
* Reduce message noisiness if ESP is missing
* Remove ERROR:, WARNING: prefixes in messages
* Use blk_create_devicef() in block device driver

Others:

* Let CONFIG_CMD_WGET depend on CONFIG_CMD_NET

Update the cedit read/write functions to support menu items with
values.

Signed-off-by: Simon Glass <sjg@chromium.org>