u-boot.git/doc/usage, branch v2025.04 Unnamed repository; edit this file 'description' to name the repository. doc: Fix typo bootfloe to bootflow 2025-04-03T07:06:51+00:00 Andrew Davis afd@ti.com 2025-03-19T15:17:42+00:00 7871285a0a8fb6726ea7537c4f592e117f93768b Signed-off-by: Andrew Davis <afd@ti.com> 
Signed-off-by: Andrew Davis <afd@ti.com>
doc: correct references to overlay-fdt-boot.txt 2025-04-03T07:05:29+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2025-03-26T10:10:24+00:00 e66148060f90292dc02062bc4c18acb6fc1f6f85 doc/uImage.FIT/overlay-fdt-boot.txt does not exist anymore. Reference the correct section of doc/usage/fit/overlay-fdt-boot.rst. Fixes: 6f6e8bb695a7 ("doc: Bring in the FIT overlay information") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
doc/uImage.FIT/overlay-fdt-boot.txt does not exist anymore.
Reference the correct section of doc/usage/fit/overlay-fdt-boot.rst.

Fixes: 6f6e8bb695a7 ("doc: Bring in the FIT overlay information")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
tcg2: decouple eventlog size from efi 2025-01-28T06:59:23+00:00 Raymond Mao raymond.mao@linaro.org 2025-01-27T14:49:35+00:00 afe26a74ddfe183b7ea76d5b36d33d2318d02c28 Move default eventlog size from efi to tpm for using in both efi and measured boot. Signed-off-by: Raymond Mao <raymond.mao@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> 
Move default eventlog size from efi to tpm for using in both
efi and measured boot.

Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
doc: Update ut documentation 2025-01-24T20:34:41+00:00 Simon Glass sjg@chromium.org 2025-01-20T21:26:06+00:00 229d145f2614c7da1ca046af35a7ccec2d688f60 Update documentation for the 'ut' command, since it has changed a little. Signed-off-by: Simon Glass <sjg@chromium.org> 
Update documentation for the 'ut' command, since it has changed a
little.

Signed-off-by: Simon Glass <sjg@chromium.org>
Merge patch series "bootstd: Support recording images" 2025-01-16T01:27:14+00:00 Tom Rini trini@konsulko.com 2025-01-15T23:34:26+00:00 178f6ecb21fe12ada74a9a1a08093c812b15eea5 Simon Glass <sjg@chromium.org> says: This series provides a way to keep track of the images used in bootstd, including the type of each image. At present this is sort-of handled by struct bootflow but in quite an ad-hoc way. The structure has become quite large and is hard to query. Future work will be able to reduce its size. Ultimately the 'bootflow info' command may change to also show images as a list, but that is left for later, as this series is already fairly long. So for now, just introduce the concept and adjust bootstd to use it, with a simple command to list the images. This series includes various alist enhancements, to make use of this new data structure a little easier. [trini: Drop patch 18 and 19 for now due to size considerations] Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org 
Simon Glass <sjg@chromium.org> says:

This series provides a way to keep track of the images used in bootstd,
including the type of each image.

At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.

Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.

This series includes various alist enhancements, to make use of this new
data structure a little easier.

[trini: Drop patch 18 and 19 for now due to size considerations]

Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
bootstd: Add a simple command to list images 2025-01-15T14:48:42+00:00 Simon Glass sjg@chromium.org 2024-11-15T23:19:23+00:00 d9055f5e4f3c62e693991e15222804ed6c1a93ef Add a new 'bootstd images' command, which lists the images which have been loaded. Update some existing tests to use it. Provide some documentation about images in general and this command in particular. Use a more realistic kernel command-line to make the test easier to follow. Signed-off-by: Simon Glass <sjg@chromium.org> 
Add a new 'bootstd images' command, which lists the images which have
been loaded.

Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.

Use a more realistic kernel command-line to make the test easier to
follow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Merge tag 'efi-next-20250105' of https://source.denx.de/u-boot/custodians/u-boot-efi 2025-01-09T00:05:51+00:00 Tom Rini trini@konsulko.com 2025-01-09T00:05:51+00:00 e13e0a921f444cc12127c8a497dcc476f1268939 Pull request efi-next-20250105 Documentation: * doc: develop: Fix typos and wording in binman/binman.rst * doc: develop: Fix typos and wording in gdb.rst * doc: sandbox: Fix the "sb" command name * doc/develop/distro.rst: Better document upstream definition of extlinux.conf UEFI: * efi_loader: avoid writing message in Exit() boot service * efi_loader: update EFI specification version * cmd: efidebug: update output of memory attributes * efi_loader: Don't warn if the TCG2 FinalEvents table is not installed * cmd: bootmenu: add parameter -e for UEFI boot options * efi_loader: Update startimage_exit self-test to check error * efi: Correct ECPT table GUID Others: Building the API demo application for riscv64 is supported. * API: unify platform_sys_info() implementations * examples: implement _start and syscall for RISC-V * examples: use architecture specific memset() on RISC-V * examples: use QEMU compatible LOAD_ADDR on RISC-V * test: fix test_extension.py * configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION * CI: xilinx_versal_virt: disable USB_DWC3 * net: eth_bootdev_hunt() should not run DHCP 
Pull request efi-next-20250105

Documentation:

* doc: develop: Fix typos and wording in binman/binman.rst
* doc: develop: Fix typos and wording in gdb.rst
* doc: sandbox: Fix the "sb" command name
* doc/develop/distro.rst: Better document upstream definition of extlinux.conf

UEFI:

* efi_loader: avoid writing message in Exit() boot service
* efi_loader: update EFI specification version
* cmd: efidebug: update output of memory attributes
* efi_loader: Don't warn if the TCG2 FinalEvents table is not installed
* cmd: bootmenu: add parameter -e for UEFI boot options
* efi_loader: Update startimage_exit self-test to check error
* efi: Correct ECPT table GUID

Others:

Building the API demo application for riscv64 is supported.

* API: unify platform_sys_info() implementations
* examples: implement _start and syscall for RISC-V
* examples: use architecture specific memset() on RISC-V
* examples: use QEMU compatible LOAD_ADDR on RISC-V
* test: fix test_extension.py
* configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION
* CI: xilinx_versal_virt: disable USB_DWC3
* net: eth_bootdev_hunt() should not run DHCP
Merge patch series "cmd: Add support for optee commands." 2025-01-08T17:58:54+00:00 Tom Rini trini@konsulko.com 2025-01-02T17:08:00+00:00 d6da3dbaef57fc1d319b6b552efa009e2489d7d9 Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> says: Add the basic 'hello world ta' command which increments the value passed. This provides easy test for establishing a session with OP-TEE TA and verify. It includes following subcommands: optee hello optee hello <value>; value to increment via OP-TEE HELLO WORLD TA. Link: https://lore.kernel.org/r/20241219043918.1646095-1-venkatesh.abbarapu@amd.com 
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> says:

Add the basic 'hello world ta' command which increments the value passed.
This provides easy test for establishing a session with OP-TEE TA and verify.

It includes following subcommands:
optee hello
optee hello <value>; value to increment via OP-TEE HELLO WORLD TA.

Link: https://lore.kernel.org/r/20241219043918.1646095-1-venkatesh.abbarapu@amd.com
doc: sandbox: Fix the "sb" command name 2025-01-05T01:30:48+00:00 Olivier L'Heureux olivier.lheureux@mind.be 2024-12-04T22:31:00+00:00 ea958a0c7dbd8b0d9fb1bb97bc8f97b6910ab8f7 The command name was "sbi" instead of "sb" in "doc/usage/cmd/sb.rst", the file documenting the "sb" command. It is annoying, because the index in the left panel on the <https://docs.u-boot.org/en/latest/usage/cmd/sb.html> page shows no "sb" command, which makes difficult to navigate to the "sb" documentation. Fixed the command name: "sbi" -> "sb". Fixes: ec6d30649cd5 (doc: sandbox: Add docs for the sb command, 2024-10-28) Signed-off-by: Olivier L'Heureux <olivier.lheureux@mind.be> Reviewed-by: Simon Glass <sjg@chromium.org> 
The command name was "sbi" instead of "sb" in "doc/usage/cmd/sb.rst",
the file documenting the "sb" command. It is annoying, because the
index in the left panel on the
<https://docs.u-boot.org/en/latest/usage/cmd/sb.html> page shows no
"sb" command, which makes difficult to navigate to the "sb"
documentation.

Fixed the command name: "sbi" -> "sb".

Fixes: ec6d30649cd5 (doc: sandbox: Add docs for the sb command, 2024-10-28)
Signed-off-by: Olivier L'Heureux <olivier.lheureux@mind.be>
Reviewed-by: Simon Glass <sjg@chromium.org>
cmd: bootmenu: add parameter -e for UEFI boot options 2025-01-05T01:30:48+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2024-11-27T07:06:30+00:00 5a4ac8a35a7ff5260ced655d2816bb135e6f6bff The bootmenu command can display * menu entries defined by environment variables * menu entries defined by UEFI boot options Not in all cases showing the UEFI boot options is desired. Provide a new parameter '-e' to select the display of UEFI boot options. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
The bootmenu command can display

* menu entries defined by environment variables
* menu entries defined by UEFI boot options

Not in all cases showing the UEFI boot options is desired.
Provide a new parameter '-e' to select the display of UEFI boot options.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>