Signed-off-by: Jonathan GUILLOT <jonathan@joggee.fr>
Fixes: ff6ef4b9093f ("doc: man-page for the part command")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

Update the command to show the size and selected file, since this is
useful information at times. Add a heading so it is clear what each
field refers to.

Add a simple test as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

This series from Marek Vasut <marek.vasut@mailbox.org> brings some
enhancements to use cases using OPTEE-OS on ARMv7a platforms, some of
which already existed on ARMv8.

Link: https://lore.kernel.org/r/20251030212359.12824-1-marek.vasut@mailbox.org

Add support for jumping to Linux kernel through OPTEE-OS on ARMv7a.
This is only supported if U-Boot runs in PL1 secure. This change adds
two components, one is fitImage OPTEE-OS loadable handler, which makes
a note of OPTEE-OS being loaded and stores the load address for later
jump to it. The second part is the actual jump to Linux through OPTEE-OS.
The jump through OPTEE-OS requires set up of multiple CPU registers, r1
and r2 are passed through, r0 and r3 have to be set to 0, lr is set to
Linux kernel entry point. This setup is done by new assembler function
boot_jump_linux_via_optee().

The boot_jump_linux_via_optee() also includes STM32MP13xx late TZC
configuration write, this cannot be moved easily, hence the ifdef.

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>

Add documentation for rproc cmd usage.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:

This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.

I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.

Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com

Add support for scanning and applying extension board devicetree
overlays during PXE boot. After loading the main board devicetree,
the system now scans for available extension boards and applies their
overlays automatically.

This enables dynamic hardware configuration for systems with extension
boards during boot scenarios which are using pxe_utils.

Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.

Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.

Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

For clarity, add a reference link to the start of the section on command
documentation that all commands follow some general rules.

Signed-off-by: Tom Rini <trini@konsulko.com>

Make use of the glob syntax to automatically include all command
documents.

Signed-off-by: Tom Rini <trini@konsulko.com>