u-boot.git/doc, branch v2009.08-rc1

Prepare 2009.08-rc1

2009-07-26T22:24:55+00:00

Update CHANGELOG, minor coding style fix.

Signed-off-by: Wolfgang Denk

new video driver for bus vcxk framebuffers

2009-07-26T11:17:21+00:00

This patch adds a new video driver

* adds common bus_vcxk framebuffer driver

Signed-off-by: Jens Scharsig 
[agust@denx.de: fixed lots of style issues before applying]
Signed-off-by: Anatolij Gustschin

Coding Style cleanup; update CHANGELOG.

2009-07-23T20:23:23+00:00

Signed-off-by: Wolfgang Denk

Add DNS support

2009-07-23T05:53:44+00:00

On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.

http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
>
> DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
> the serverip environment var is updated.
>
> Probably there are some cosmetic issues with the patch. Unfortunatly I
> do not have the time to correct these. So if anybody else likes DNS
> support in U-Boot and has the time, feel free to patch it in the main tree.

Here it is again - slightly modified & smaller:
  - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
  - README.dns is added
  - syntax is changed (now takes a third option, the env var to store
    the result in)
  - add a random port() function in net.c
  - sort Makefile in ./net/Makefile
  - dns just returns unless a env var is given
  - run through checkpatch, and clean up style issues
  - remove packet from stack
  - cleaned up some comments
  - failure returns much faster (if server responds, don't wait for
    timeout)
  - use built in functions (memcpy) rather than byte copy.

Signed-off-by: Robin Getz 
Signed-off-by: Pieter Voorthuijsen 
Signed-off-by: Ben Warren

Remove legacy NAND and disk on chip code.

2009-07-17T00:07:47+00:00

Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood

Merge branch 'master' of /home/wd/git/u-boot/master

2009-07-13T22:00:04+00:00

Merge branch 'master' of git://git.denx.de/u-boot-arm

2009-07-13T21:45:02+00:00

at91: Introduction of at91sam9g10 SOC.

2009-07-12T15:56:11+00:00

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Signed-off-by: Sedji Gaouaou

at91: Introduction of at91sam9g45 SOC.

2009-07-12T15:43:34+00:00

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

Signed-off-by: Sedji Gaouaou

board support patch for phyCORE-MPC5200B-tiny

2009-07-10T21:21:32+00:00

Add support for the Phytec phyCORE-MPC5200B-tiny.
Code originally from Pengutronix.de.
Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on
Timer 0/1

Signed-off-by: Jon Smirl 
Acked-by: Grant Likely