u-boot.git/doc, branch v2011.03-rc2 Unnamed repository; edit this file 'description' to name the repository. Coding Style cleanup: remove trailing empty lines 2011-03-27T19:48:08+00:00 Wolfgang Denk wd@denx.de 2011-03-27T19:48:08+00:00 14666418e9aa3c7480c640cd8e86935b64f05433 Signed-off-by: Wolfgang Denk <wd@denx.de> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
Add USB host ethernet adapter support 2011-02-19T19:32:36+00:00 Simon Glass sjg@chromium.org 2011-02-16T19:14:33+00:00 89d48367edbc878f86db3008a4107331ef07f578 This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: Simon Glass <sjg@chromium.org> 
This adds support for using USB Ethernet dongles in host mode. This is just
the framework - drivers will come later. A new config option called
CONFIG_USB_HOST_ETHER can be defined in board config files to switch this
on.

The was originally written by NVIDIA and was cleaned up for release by the
Chromium authors.

Signed-off-by: Simon Glass <sjg@chromium.org>
Merge branch 'master' of git://git.denx.de/u-boot-sh 2011-02-04T19:38:27+00:00 Wolfgang Denk wd@denx.de 2011-02-04T19:38:27+00:00 4bfa18fb99e4ffa9451d9ec95375a5e970847bf8 






Minor Coding Style Cleanup.
2011-02-02T21:36:10+00:00

Wolfgang Denk
wd@denx.de

2011-02-02T21:36:10+00:00

d1a24f061849ebe4f288d95e8ceb8380f762d323

Signed-off-by: Wolfgang Denk <wd@denx.de>





Signed-off-by: Wolfgang Denk <wd@denx.de>







sh: add support for sh7757lcr board
2011-02-02T07:38:41+00:00

Yoshihiro Shimoda
yoshihiro.shimoda.uh@renesas.com

2011-02-02T01:05:36+00:00

8e9c897b2120ccf4e1177bf3662010f6d073aa64

The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.

This patch supports the following functions:
 - 256MB DDR3-SDRAM
 - SPI ROM
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>





The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.

This patch supports the following functions:
 - 256MB DDR3-SDRAM
 - SPI ROM
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>







OMAP3: add CM-T35 board
2011-02-01T23:54:43+00:00

Mike Rapoport
mike@compulab.co.il

2010-12-18T22:43:19+00:00

36b4e2dddd3ee481411fa50e1c34dbf823eb5f5d

This patch adds support for CM-T35 board

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>





This patch adds support for CM-T35 board

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>







Add support for Freescale's mx35pdk board.
2011-02-01T23:54:43+00:00

Stefano Babic
sbabic@denx.de

2011-01-20T08:05:15+00:00

eae4988b45e17054f27d58b6fe0b42e080951382

The patch adds suupport for the Freescale's mx35pdk board
(known as well as mx35_3stack).

The board boots from the NOR flash. Following devices
are supported:
 - two ethernet devices (FEC and SMC911x on debug board)
 - I2C
 - PMIC (MC13892) via I2C interface
 - UART
 - NOR flash (64MB)
 - NAND flash (2GB)
 - basic access to mc9sdz60 registers via I2C interface

Signed-off-by: Stefano Babic <sbabic@denx.de>





The patch adds suupport for the Freescale's mx35pdk board
(known as well as mx35_3stack).

The board boots from the NOR flash. Following devices
are supported:
 - two ethernet devices (FEC and SMC911x on debug board)
 - I2C
 - PMIC (MC13892) via I2C interface
 - UART
 - NOR flash (64MB)
 - NAND flash (2GB)
 - basic access to mc9sdz60 registers via I2C interface

Signed-off-by: Stefano Babic <sbabic@denx.de>







imximage: Add MX53 boot image support
2011-02-01T23:54:42+00:00

Liu Hui-R64343
r64343@freescale.com

2011-01-19T09:40:26+00:00

8a1edd7d54096ed28232a6cfec7288cd0426d988

This patch add the MX53 boot image support.

This patch has been tested on Freescale MX53EVK board
and MX51EVK board.

Signed-off-by: Jason Liu <r64343@freescale.com>





This patch add the MX53 boot image support.

This patch has been tested on Freescale MX53EVK board
and MX51EVK board.

Signed-off-by: Jason Liu <r64343@freescale.com>







Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2011-01-25T20:13:04+00:00

Wolfgang Denk
wd@denx.de

2011-01-25T20:13:04+00:00

5aebe3b07254d9ec8f7ae23a4525a6c535a7f858












mpc85xx: Enable unique mode registers and dynamic ODT for DDR3
2011-01-20T04:58:23+00:00

York Sun
yorksun@freescale.com

2011-01-10T12:03:00+00:00

e1fd16b6f5e80d932c73f5a36141adfb35126e83

Added fsl_ddr_get_version() function to for DDR3 to poll DDRC IP version
(major, minor, errata) to determine if unique mode registers are available.
If true, always use unique mode registers. Dynamic ODT is enabled if needed.
The table is documented in doc/README.fsl-ddr. This function may also need
to be extend for future other platforms if such a feature exists.

Enable address parity and RCW by default for RDIMMs.

Change default output driver impedance from 34 ohm to 40ohm. Make it 34ohm for
quad-rank RDIMMs.

Use a formula to calculate rodt_on for timing_cfg_5.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>





Added fsl_ddr_get_version() function to for DDR3 to poll DDRC IP version
(major, minor, errata) to determine if unique mode registers are available.
If true, always use unique mode registers. Dynamic ODT is enabled if needed.
The table is documented in doc/README.fsl-ddr. This function may also need
to be extend for future other platforms if such a feature exists.

Enable address parity and RCW by default for RDIMMs.

Change default output driver impedance from 34 ohm to 40ohm. Make it 34ohm for
quad-rank RDIMMs.

Use a formula to calculate rodt_on for timing_cfg_5.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>