<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/doc, branch v2014.04-rc2</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>m68k: Remove M5271EVB and idmr board support</title>
<updated>2014-03-10T15:38:13+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>yamada.m@jp.panasonic.com</email>
</author>
<published>2014-02-21T00:55:16+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=ba650e9b5263bfc7579e6775676441eeeca2edc4'/>
<id>ba650e9b5263bfc7579e6775676441eeeca2edc4</id>
<content type='text'>
CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it
as 1000000 and idmr.h defines it as (50000000 / 64).

When compiling these two boards, a warning message is displayed:

  time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000
  and should not be defined by platforms" [-Wcpp]

There are no board maintainers for them so this commit just
deletes them.

Signed-off-by: Masahiro Yamada &lt;yamada.m@jp.panasonic.com&gt;
Cc: Jason Jin &lt;Jason.jin@freescale.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it
as 1000000 and idmr.h defines it as (50000000 / 64).

When compiling these two boards, a warning message is displayed:

  time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000
  and should not be defined by platforms" [-Wcpp]

There are no board maintainers for them so this commit just
deletes them.

Signed-off-by: Masahiro Yamada &lt;yamada.m@jp.panasonic.com&gt;
Cc: Jason Jin &lt;Jason.jin@freescale.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.denx.de/u-boot-mips</title>
<updated>2014-03-04T23:13:06+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@ti.com</email>
</author>
<published>2014-03-04T23:13:06+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=32907339c2f533f1d59362c6100c6a0eeeca4837'/>
<id>32907339c2f533f1d59362c6100c6a0eeeca4837</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>malta: correct tcl script path in README.malta</title>
<updated>2014-03-04T22:41:54+00:00</updated>
<author>
<name>James Hogan</name>
<email>james.hogan@imgtec.com</email>
</author>
<published>2014-03-04T14:48:42+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=b2099d16dc90fc94f050dfc9391c645c83d06cb8'/>
<id>b2099d16dc90fc94f050dfc9391c645c83d06cb8</id>
<content type='text'>
README.malta referred to board/malta, but malta has now been moved
within board/imgtec/, so correct the path.

Signed-off-by: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: Daniel Schwierzeck &lt;daniel.schwierzeck@googlemail.com&gt;
Cc: Paul Burton &lt;paul.burton@imgtec.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
README.malta referred to board/malta, but malta has now been moved
within board/imgtec/, so correct the path.

Signed-off-by: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: Daniel Schwierzeck &lt;daniel.schwierzeck@googlemail.com&gt;
Cc: Paul Burton &lt;paul.burton@imgtec.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: Remove old driver model documentation</title>
<updated>2014-03-04T17:15:30+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2014-02-26T22:59:27+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=f9aa6a1086f6b7da1814a2c95feefa91c9c4b593'/>
<id>f9aa6a1086f6b7da1814a2c95feefa91c9c4b593</id>
<content type='text'>
This documentation pertains to the planned implementation of driver model
in U-Boot for each subsystem, but it has not been superseded. It is
probably better to have this documentation in the source code for each
subsystem where possible, so that docbook will pick it up. Where this does
not make sense, new documentation can be placed in some suitable file in
doc/driver-model.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This documentation pertains to the planned implementation of driver model
in U-Boot for each subsystem, but it has not been superseded. It is
probably better to have this documentation in the source code for each
subsystem where possible, so that docbook will pick it up. Where this does
not make sense, new documentation can be placed in some suitable file in
doc/driver-model.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: Add README for driver model</title>
<updated>2014-03-04T17:15:29+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2014-02-26T22:59:17+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=65c70539e5f1e63921a7fcb86c0ca1f838f96037'/>
<id>65c70539e5f1e63921a7fcb86c0ca1f838f96037</id>
<content type='text'>
This adds a README to help with understanding of this series.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This adds a README to help with understanding of this series.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.denx.de/u-boot-arm</title>
<updated>2014-02-26T21:49:58+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@ti.com</email>
</author>
<published>2014-02-26T21:49:58+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=eeb72e67619b98d2502fe634a3a5d9953de92ad0'/>
<id>eeb72e67619b98d2502fe634a3a5d9953de92ad0</id>
<content type='text'>
Conflicts:
	arch/arm/cpu/armv7/config.mk
	board/ti/am43xx/mux.c
	include/configs/am43xx_evm.h

Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Conflicts:
	arch/arm/cpu/armv7/config.mk
	board/ti/am43xx/mux.c
	include/configs/am43xx_evm.h

Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>arm: Switch to -mno-unaligned-access when supported by the compiler</title>
<updated>2014-02-26T20:19:32+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@ti.com</email>
</author>
<published>2014-02-25T15:27:01+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=1551df35f296f0a8df32f4f2054254f46e8be252'/>
<id>1551df35f296f0a8df32f4f2054254f46e8be252</id>
<content type='text'>
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that
matter) it assumes a default of SCTRL.A being cleared and unaligned
accesses being allowed and fast at the hardware level.  We set this bit
and must pass along -mno-unaligned-access so that the compiler will
still breakdown accesses and not trigger a data abort.

To better help understand the requirements of the project with respect
to unaligned memory access, the
Documentation/unaligned-memory-access.txt file has been added as
doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1
tag of the kernel.

Cc: Albert ARIBAUD &lt;albert.u.boot@aribaud.net&gt;
Cc: Mans Rullgard &lt;mans@mansr.com&gt;
Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that
matter) it assumes a default of SCTRL.A being cleared and unaligned
accesses being allowed and fast at the hardware level.  We set this bit
and must pass along -mno-unaligned-access so that the compiler will
still breakdown accesses and not trigger a data abort.

To better help understand the requirements of the project with respect
to unaligned memory access, the
Documentation/unaligned-memory-access.txt file has been added as
doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1
tag of the kernel.

Cc: Albert ARIBAUD &lt;albert.u.boot@aribaud.net&gt;
Cc: Mans Rullgard &lt;mans@mansr.com&gt;
Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kbuild: consolidate version and timestamp headers generation</title>
<updated>2014-02-25T16:01:28+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>yamada.m@jp.panasonic.com</email>
</author>
<published>2014-02-24T02:12:09+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=7424145f30c9ce9c40151765bd08029af7550f1d'/>
<id>7424145f30c9ce9c40151765bd08029af7550f1d</id>
<content type='text'>
- Generate include/generated/{timestamp.h, version.h}
   more simply by using filechk rule.

 - Add $(UBOOTRELEASE) variable and re-write u-boot.imx rule
   more simply.

 - Rename U_BOOT_VERSION in Makefile to UBOOTVERSION

   Before this commit, the same variable name, "U_BOOT_VERSION"
   was used for two different strings.

   One of them was defined in Makefile.
   It takes the form like "2014.01-rc1" and used in
   makefiles and script files.

   The other is defined in include/generated/version.h
   It takes the form like "U-Boot 2014.01-rc1-00010-gbe6d426-dirty"
   and used in C and Aseembler.

   It is confusing when grepping the source tree. So, this commit
   renames the former to UBOOTVERSION.

Signed-off-by: Masahiro Yamada &lt;yamada.m@jp.panasonic.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
- Generate include/generated/{timestamp.h, version.h}
   more simply by using filechk rule.

 - Add $(UBOOTRELEASE) variable and re-write u-boot.imx rule
   more simply.

 - Rename U_BOOT_VERSION in Makefile to UBOOTVERSION

   Before this commit, the same variable name, "U_BOOT_VERSION"
   was used for two different strings.

   One of them was defined in Makefile.
   It takes the form like "2014.01-rc1" and used in
   makefiles and script files.

   The other is defined in include/generated/version.h
   It takes the form like "U-Boot 2014.01-rc1-00010-gbe6d426-dirty"
   and used in C and Aseembler.

   It is confusing when grepping the source tree. So, this commit
   renames the former to UBOOTVERSION.

Signed-off-by: Masahiro Yamada &lt;yamada.m@jp.panasonic.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.denx.de/u-boot-spi</title>
<updated>2014-02-21T13:00:22+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@ti.com</email>
</author>
<published>2014-02-21T13:00:22+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=4c89a369c7cd6e7ad3adec4601cfa69fec476164'/>
<id>4c89a369c7cd6e7ad3adec4601cfa69fec476164</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'u-boot/master' into 'u-boot-arm/master'</title>
<updated>2014-02-20T12:16:05+00:00</updated>
<author>
<name>Albert ARIBAUD</name>
<email>albert.u.boot@aribaud.net</email>
</author>
<published>2014-02-20T12:16:05+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=3e11350255d9c5d4bd03c2a65769da84c05d3294'/>
<id>3e11350255d9c5d4bd03c2a65769da84c05d3294</id>
<content type='text'>
Conflicts:
	Makefile
	drivers/net/npe/Makefile

These two conflicts arise from commit 0b2d3f20
("ARM: NET: Remove the IXP NPE ethernet driver") and are
resolved by deleting the drivers/net/npe/Makefile file
and removing the CONFIG_IXP4XX_NPE line from Makefile.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Conflicts:
	Makefile
	drivers/net/npe/Makefile

These two conflicts arise from commit 0b2d3f20
("ARM: NET: Remove the IXP NPE ethernet driver") and are
resolved by deleting the drivers/net/npe/Makefile file
and removing the CONFIG_IXP4XX_NPE line from Makefile.
</pre>
</div>
</content>
</entry>
</feed>
