u-boot.git/doc, branch v2017.01

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-01-02T21:32:05+00:00

doc/README.cfi: Update code snippet, and add example.

2017-01-02T16:14:01+00:00

First, update the code snippet referenced in the README file. And
since there are only two boards that override flash_cmd_reset(),
might as well show them both.

Signed-off-by: Robert P. J. Day

Makefile: preserve output for images that can contain HAB Blocks

2017-01-02T16:07:39+00:00

To being able to sign created binaries, we need to know the HAB Blocks
for that image. Especially for the imximage type the HAB Blocks are
only available during creation of the image. We want to preserve the
information until we get to sign the files.
In the verbose case we still get them printed out instead of writing
to log files.

Cc: sbabic@denx.de

v2-Changes:
 - No usage of MKIMAGEOUTPUT_$(@F) macro.
 - Predefine default value /dev/null in every involved Makefile.

Signed-off-by: Sven Ebenfeld 
Reviewed-by: George McCollister 
Tested-by: George McCollister

doc: imx6: add section for secure boot with SPL

2017-01-02T16:07:21+00:00

Cc: sbabic@denx.de

Signed-off-by: Sven Ebenfeld 
Reviewed-by: George McCollister

MAINTAINERS, git-mailrc: update the Power maintainer

2016-12-27T16:24:15+00:00

Przemyslaw didn't maintain the PMIC anymore.
Update the pmic maintainer from Przeymyslaw to me.

Signed-off-by: Jaehoon Chung 
Reviewed-by: Simon Glass

regulator: fixed: Add support to handle enable-active-high DT property

2016-12-27T13:22:57+00:00

Add support to handle enable-active-high DT property. This property is
used to drive the gpio controlling fixed regulator as active high when
claiming gpio line.

Signed-off-by: Vignesh R 
Acked-by: Simon Glass

arm64: mvebu: Fix A8K memory mapping and add documentation

2016-12-21T08:52:35+00:00

Fix the MMU mapping for A8K device family:
 - Separate A7K and A8K memory mappings
 - Fix memory regions by including IO mapping for all
   3 PCIe interfaces existing on each connected CP110 controller
Add A8K memory mapping documentation with all regions
configured by Marvell ATF.

Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6
Signed-off-by: Konstantin Porotchkin 
Signed-off-by: Stefan Roese 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa

arm64: mvebu: Add pin control nodes to A8K family DTS files

2016-12-12T08:04:52+00:00

Add pin control nodes to APN806, CP-master, CP-slave and
Armada-7040 and Armada-8040 boards DTS files

Signed-off-by: Konstantin Porotchkin 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa 
Signed-off-by: Stefan Roese

arm64: mvebu: pinctrl: Add pin control driver for A8K family

2016-12-12T08:04:52+00:00

Add a DM port of Marvell pin control driver.
The A8K SoC family contains several silicone dies interconnected
in a single package. Every die is normally equipped with its own
pin controller unit.
There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC.

Signed-off-by: Konstantin Porotchkin 
Reviewed-by: Simon Glass 
Cc: Simon Glass 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa 
Signed-off-by: Stefan Roese

arm64: mvebu: Add bubt command for flash image burn

2016-12-12T08:04:52+00:00

Add support for mvebu bubt command for flash image
load, check and burn on boot device.

Signed-off-by: Konstantin Porotchkin 
Reviewed-by: Stefan Roese 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa 
Signed-off-by: Stefan Roese