u-boot.git/doc, branch v2020.07-rc4 Unnamed repository; edit this file 'description' to name the repository. Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx 2020-06-08T12:51:59+00:00 Tom Rini trini@konsulko.com 2020-06-08T12:51:59+00:00 08649c3d50b1ca014a9e0bf87c724f99f88a20ce - DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942 
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug
  fixes
- Add TBI PHY access through MII
- DDR: Rework errata workaround for A008109, A008378, 009942
doc: rockchip: Document SPI flash program steps 2020-06-07T10:57:16+00:00 Jagan Teki jagan@amarulasolutions.com 2020-06-04T14:51:41+00:00 dd397609fc45472d78894256e1effd6902a7c12d Document SPI flash program steps for rockchip platforms. Suggested-by: Hugh Cole-Baker <sigmaris@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Document SPI flash program steps for rockchip platforms.

Suggested-by: Hugh Cole-Baker <sigmaris@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rockchip: rk3328: add rock-pi-e-rk3328_defconfig file 2020-06-07T10:57:16+00:00 b.l.huang banglang.huang@foxmail.com 2020-05-31T16:02:11+00:00 d9c3417b528902fc16e831c931d56aa6aae73141 This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com> 
This commit add the default configuration file and relevant description
for rock-pi-e board

Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
checkpatch.pl: Request a test when a new command is added 2020-06-04T22:10:02+00:00 Simon Glass sjg@chromium.org 2020-05-22T22:32:39+00:00 58978114d93d5010d15c8be792f9e444da5fb250 This request is made with nearly every new command. Point to some docs on how to do it. Signed-off-by: Simon Glass <sjg@chromium.org> 
This request is made with nearly every new command. Point to some docs
on how to do it.

Signed-off-by: Simon Glass <sjg@chromium.org>
doc: dt-bindings: tsec: Correct the Ethernet port compatible string 2020-06-04T13:23:20+00:00 Hou Zhiqiang Zhiqiang.Hou@nxp.com 2020-05-03T14:48:41+00:00 a139ac58a7aad3110a4188ed1770ceb0f70f37d8 Change the compatible string to "fsl,etsec2" for the Ethernet ports, which is used in the current driver's match table. Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Change the compatible string to "fsl,etsec2" for the Ethernet ports,
which is used in the current driver's match table.

Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
doc: sifive: fu540: Add description for OpenSBI generic platform 2020-06-04T01:44:09+00:00 Pragnesh Patel pragnesh.patel@sifive.com 2020-05-29T06:03:39+00:00 c1416429ba282ebf62f80b8eeb4e3eb388a8edb2 OpenSBI generic platform support provides platform specific functionality based on the FDT passed by previous booting stage. Depends on OpenSBI commit: platform: Add generic FDT based platform support (sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> 
OpenSBI generic platform support provides platform specific
functionality based on the FDT passed by previous booting stage.

Depends on OpenSBI commit:
platform: Add generic FDT based platform support
(sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
configs: fu540: Add config options for U-Boot SPL 2020-06-04T01:44:09+00:00 Pragnesh Patel pragnesh.patel@sifive.com 2020-05-29T06:03:38+00:00 7649e5987822d556d0a65fe37274b56f029f0e03 With sifive_fu540_defconfig: User can use FSBL or u-boot-spl.bin anyone at a time. For FSBL, fsbl->fw_payload.bin (opensbi + U-Boot) For u-boot-spl.bin, u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from SD card into RAM. U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985" Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
With sifive_fu540_defconfig:

User can use FSBL or u-boot-spl.bin anyone at a time.

For FSBL,
fsbl->fw_payload.bin (opensbi + U-Boot)

For u-boot-spl.bin,
u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb)

U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with
u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT
image u-boot.itb from SD card into RAM.

U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector
number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985"

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi 2020-06-03T16:27:51+00:00 Tom Rini trini@konsulko.com 2020-06-03T16:27:51+00:00 0d8f35b58cc8458a5263b424896a386429ee49e5 - Toshiba spinand (Yoshio) - SPI/SPI Flash cleanup (Jagan) - Remove SH SPI (Jagan) 
- Toshiba spinand (Yoshio)
- SPI/SPI Flash cleanup (Jagan)
- Remove SH SPI (Jagan)
cubieboard7: Remove ARCH= references from documentation 2020-06-02T21:27:04+00:00 Tom Rini trini@konsulko.com 2020-05-26T18:36:55+00:00 1e374089bdfb4fd41a34204b53474180e0be0125 When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Amit Singh Tomar <amittomer25@gmail.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com> 
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry.

Cc: Amit Singh Tomar <amittomer25@gmail.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
fu540: Remove ARCH= references from documentation 2020-06-02T21:27:04+00:00 Tom Rini trini@konsulko.com 2020-05-26T18:36:54+00:00 e836a71b700862b4eacc20209ec225aa427c56e3 When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry.

Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Tom Rini <trini@konsulko.com>