u-boot.git/doc, branch v2023.04-rc4

Prepare v2023.04-rc4

2023-03-14T00:52:48Z

Signed-off-by: Tom Rini

doc: man-page for panic command

2023-03-13T12:56:14Z

Provide a man-page for the panic command. Signed-off-by: Heinrich Schuchardt Reviewed-by: Simon Glass

doc: uefi: fix links

2023-03-13T12:56:14Z

Fix a couple of links so that they are rendered correctly with sphinx. Signed-off-by: Vincent Stehlé Cc: Heinrich Schuchardt Cc: Ilias Apalodimas Reviewed-by: Heinrich Schuchardt

board: rockchip: add Radxa ROCK5B Rk3588 board

2023-02-28T10:07:29Z

ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev Reviewed-by: Kever Yang

board: rockchip: Add Edgeble Neural Compute Module 6

2023-02-28T10:07:28Z

Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Boot log for the record, DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 => Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

evb-rk3568: Update MAINTAINERS and documentation

2023-02-28T10:07:27Z

Update the MAINTAINERS file to include the devicetree for the rk3568-evb1-v10 board. Also update Rockchip board docs to include information on building RK3568 based devices. Signed-off-by: Chris Morgan Signed-off-by: Kever Yang

rockchip: Use an external TPL binary on RK3568

2023-02-28T10:07:26Z

Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps back to BootRom to load next stage, U-Boot SPL, into DRAM. BootRom then jumps to U-Boot SPL to continue the normal boot flow. However, there is no support to initialize DRAM on RK35xx SoCs using U-Boot TPL and instead an external TPL binary must be used to generate a bootable u-boot-rockchip.bin image. Add CONFIG_ROCKCHIP_EXTERNAL_TPL to indicate that an external TPL should be used. Build U-Boot with ROCKCHIP_TPL=/path/to/ddr.bin to generate a bootable u-boot-rockchip.bin image for RK3568. Signed-off-by: Jonas Karlman Reviewed-by: Simon Glass Reviewed-by: Kever Yang Tested-by: Eugen Hristev

Prepare v2023.04-rc3

2023-02-27T22:18:36Z

Signed-off-by: Tom Rini

Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra

2023-02-23T22:40:18Z

ARM: tegra20: implement BCT patching

2023-02-23T19:55:37Z

This function allows updating bootloader from u-boot on production devices without need in host PC. Be aware! It works only with re-crypt BCT. Tested-by: Robert Eckelmann # ASUS TF101 T20 Signed-off-by: Ramin Khonsari Signed-off-by: Svyatoslav Ryhel Signed-off-by: Tom