u-boot.git/doc, branch v2023.10-rc2

Prepare v2023.10-rc2

2023-08-07T19:26:50+00:00

Signed-off-by: Tom Rini

board: toradex: add verdin am62 support

2023-08-04T19:03:42+00:00

This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.

The device trees were taken straight from Linux v6.5-rc1.

Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
  ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)

Signed-off-by: Marcel Ziswiler 
Reviewed-by: Nishanth Menon

doc: describe QEMU virtio block device

2023-08-03T07:21:02+00:00

Enhance the description of QEMU block devices

* Describe how to attach a virtio-blk device.
* Sort the command lines for MMC to match the other devices.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass

doc: move README.falcon to HTML

2023-08-03T07:21:02+00:00

Move the Falcon mode documentation to HTML.

Signed-off-by: Heinrich Schuchardt

doc: board: ti: Add SPDX License to svg images

2023-08-03T07:21:02+00:00

Add Licensing to svg images to clarify the terms.

Signed-off-by: Nishanth Menon 
Reviewed-by: Heinrich Schuchardt

doc: U-Boot boot phases

2023-08-03T07:21:02+00:00

Add more detail to the description of U-Boot boot phases:

* describe which steps are optional
* mentions alternative boot flows

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Bin Meng

riscv: qemu: Enable usb keyboard as an input device

2023-08-02T08:32:44+00:00

This brings PCI xHCI support to QEMU RISC-V and uses a usb keyboard
as one of the input devices.

Signed-off-by: Bin Meng 
Reviewed-by: Rick Chen 
Reviewed-by: Simon Glass

riscv: qemu: Enable Bochs video support

2023-08-02T08:31:52+00:00

Enable video console using the emulated Bochs VGA card.

Signed-off-by: Bin Meng 
Reviewed-by: Simon Glass

board: rockchip: Add Radxa E25 Carrier Board

2023-07-31T12:34:32+00:00

Radxa E25 is a network application carrier board for the Radxa CM3I SoM
with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key,
USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header.

Features tested on a Radxa E25 v1.4:
- SD-card boot
- eMMC boot
- USB host
- PCIe/Ethernet adapters is detected
- SATA

Device tree is imported from linux next-20230728.

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang 
Tested-by: FUKAUMI Naoki

board: rockchip: add Radxa ROCK5A Rk3588 board

2023-07-31T09:34:43+00:00

ROCK 5A is a Rockchip RK3588S based SBC (Single Board Computer) by Radxa.

There are tree variants depending on the DRAM size : 4G, 8G and 16G.

Specifications:

     Rockchip Rk3588S SoC
     4x ARM Cortex-A76, 4x ARM Cortex-A55
     4/8/16GB memory LPDDR4x
     Mali G610MC4 GPU
     MIPI CSI 2 multiple lanes connector
     4-lane MIPI DSI connector
     Audio – 3.5mm earphone jack
     eMMC module connector
     uSD slot (up to 128GB)
     2x USB 2.0, 2x USB 3.0
     2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60
     Gigabit Ethernet RJ45 with optional PoE support
     40-pin IO header including UART, SPI, I2C and 5V DC power in
     USB PD over USB Type-C
     Size: 85mm x 56mm (Raspberry Pi 4 form factor)

Kernel commits:
d1824cf95799 ("arm64: dts: rockchip: Add rock-5a board")
991f136c9f8d ("arm64: dts: rockchip: Update sdhci alias for rock-5a")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a")

Signed-off-by: Eugen Hristev 
Reviewed-by: Kever Yang