u-boot.git/doc, branch v2024.01-rc2

Prepare v2024.01-rc2

2023-11-06T19:47:25+00:00

Signed-off-by: Tom Rini

power: pmic: tps65910: add TPS65911 PMIC support

2023-11-03T16:37:15+00:00

Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write functions to access pmic
registers.

Signed-off-by: Svyatoslav Ryhel 
Reviewed-by: Simon Glass

power: pmic: add the base TPS80031 PMIC support

2023-11-03T16:37:15+00:00

Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write functions to access pmic
registers.

Signed-off-by: Svyatoslav Ryhel 
Reviewed-by: Simon Glass

power: pmic: add the base MAX77663 PMIC support

2023-11-03T16:37:15+00:00

Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write functions to access pmic
registers.

Signed-off-by: Svyatoslav Ryhel 
Reviewed-by: Simon Glass 
Reviewed-by: Jaehoon Chung

Merge tag 'u-boot-dfu-20231103' of https://source.denx.de/u-boot/custodians/u-boot-dfu

2023-11-03T13:52:37+00:00

u-boot-dfu-20231103

- Fix CRC chunk size in fastboot
- Make size optional for dfu on mmc

riscv: allow resume after exception

2023-11-02T08:22:06+00:00

If CSRs like seed are readable by S-mode, may not be determinable by
S-mode. For safe driver probing allow to resume via a longjmp after an
exception.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Leo Yu-Chi Liang

cmd: mmc: Add mmc reg read command for reading card registers

2023-11-01T01:09:21+00:00

Add extension to the 'mmc' command to read out the card registers.
Currently, only the eMMC OCR/CID/CSD/EXTCSD/RCA/DSR register are
supported. A register value can either be displayed or read into
an environment variable.

Tested-by: Jaehoon Chung 
Reviewed-by: Jaehoon Chung 
Signed-off-by: Marek Vasut 
Reviewed-by: Fabio Estevam

board: developerbox: update flash rawwrite binary size

2023-10-31T17:08:10+00:00

Current documentation limits the firmware size to 1.5MB.
When the fTPM and StandaloneMM-based RPMB secure storage is
enabled, firmware size is bigger than that size.
Let's specify the A/B update bank size(4MB) for flash
rawwrite parameter.

Signed-off-by: Masahisa Kojima 
Acked-by: Jassi Brar 
Reviewed-by: Ilias Apalodimas

board: developerbox: update old NOR flash layout build instruction

2023-10-31T17:08:10+00:00

v2023.07 is the last version supporting old NOR flash layout
by default. The later versions of U-Boot, Developerbox is
configured to enable A/B update and new NOR Flash layout
by default.
This commit updates the documentation to pin the U-Boot
version for the old NOR flash layout. It is still useful
for the user wants to replace the factory default EDK II
firmware to U-Boot.

Signed-off-by: Masahisa Kojima 
Acked-by: Jassi Brar 
Reviewed-by: Ilias Apalodimas

dfu: mmc: Add support for exposing whole mmc device

2023-10-31T13:53:05+00:00

Add support for exposing the whole mmc device by setting the 'size'
parameter to 0. This can be useful in case it is not clear what the
total device size is up front. Update the documentation accordingly.

Signed-off-by: Marek Vasut 
Reviewed-by: Mattijs Korpershoek 
Reviewed-by: Lukasz Majewski 
Link: https://lore.kernel.org/r/20231029223740.284149-1-marex@denx.de
Signed-off-by: Mattijs Korpershoek