u-boot.git/doc, branch v2024.07-rc2 Unnamed repository; edit this file 'description' to name the repository. Prepare v2024.07-rc2 2024-05-06T19:54:17+00:00 Tom Rini trini@konsulko.com 2024-05-06T19:54:17+00:00 52835266d3e933656a217233eaf672dd9ccd7352 Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
doc: correct description of 'env print -e' 2024-05-01T05:39:05+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2024-04-22T20:00:56+00:00 5ab82b10f02296232a14fde6dab1803559ab62e5 If 'env print -e' is invoked without variable name, all UEFI variables are listed. Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of UEFI variables. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
If 'env print -e' is invoked without variable name, all UEFI variables are
listed.

Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of
UEFI variables.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
rockchip: rk3588-coolpi: Add boards to documentation 2024-04-26T07:47:04+00:00 Jonas Karlman jonas@kwiboo.se 2024-04-22T06:28:54+00:00 7757a5666fd2fc0c481884feb87e74be6ec83afb Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation. Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation.

Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
board: add support for Schneider HMIBSC board 2024-04-23T11:29:25+00:00 Sumit Garg sumit.garg@linaro.org 2024-04-12T09:54:38+00:00 969e3dd13e427dd2328e07b9e3131c2d74e436c1 Support for Schneider Electric HMIBSC. Features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 2GiB RAM - 64GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI Features enabled in U-Boot: - RAUC updates - Environment protection - USB based ethernet adaptors Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
Support for Schneider Electric HMIBSC. Features:
- Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
- 2GiB RAM
- 64GiB eMMC, SD slot
- WiFi and Bluetooth
- 2x Host, 1x Device USB port
- HDMI
- Discrete TPM2 chip over SPI

Features enabled in U-Boot:
- RAUC updates
- Environment protection
- USB based ethernet adaptors

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
serial: msm: calculate bit clock divider 2024-04-23T11:29:16+00:00 Caleb Connolly caleb.connolly@linaro.org 2024-04-15T15:03:40+00:00 69e9b3428bfee99ef3a5ece6e6c69a1ad1b39bd9 The driver currently requires the bit clock divider be hardcoded in devicetree (or use the hardcoded default from apq8016). The bit clock divider is used to derive the baud rate from the core clock: baudrate = clk_rate / csr_div clk_rate is the actual programmed core clock rate which is returned by clk_set_rate(), and this UART driver only supports a baudrate of 115200. We can therefore determine the appropriate value for UARTDM_CSR by iterating over the possible values and finding the one where the equation above holds true for a baudrate of 115200. Implement this logic and drop the non-standard DT bindings for this driver. Tested on dragonboard410c. Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
The driver currently requires the bit clock divider be hardcoded in
devicetree (or use the hardcoded default from apq8016).

The bit clock divider is used to derive the baud rate from the core
clock:

  baudrate = clk_rate / csr_div

clk_rate is the actual programmed core clock rate which is returned by
clk_set_rate(), and this UART driver only supports a baudrate of 115200.
We can therefore determine the appropriate value for UARTDM_CSR by
iterating over the possible values and finding the one where the
equation above holds true for a baudrate of 115200.

Implement this logic and drop the non-standard DT bindings for this
driver.

Tested on dragonboard410c.

Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Prepare v2024.07-rc1 2024-04-22T21:10:21+00:00 Tom Rini trini@konsulko.com 2024-04-22T21:10:21+00:00 38ea74d6d5c05224acdb03f799897c1bdd56f8cc Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
doc: release_cycle: Note when next branch opens 2024-04-22T17:01:37+00:00 Tom Rini trini@konsulko.com 2024-04-22T16:44:54+00:00 9fa8ba1ee1b6ea5361fded5422b19a9b3c1c2ad4 While I have said this in various release emails, it should be documented here as well that the next branch opens with the second release candidate. Signed-off-by: Tom Rini <trini@konsulko.com> 
While I have said this in various release emails, it should be
documented here as well that the next branch opens with the second
release candidate.

Signed-off-by: Tom Rini <trini@konsulko.com>
doc: update list of aliases for the env command 2024-04-20T06:17:56+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2024-04-17T08:06:13+00:00 bf92db1033d9ef20243f30751169e2e5b302c2ad * add link to askenv man-page * add printenv Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
* add link to askenv man-page
* add printenv

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
doc: sort env sub-commands alphabetically 2024-04-20T06:17:56+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2024-04-17T08:06:12+00:00 12dfc68c204e908fc4bac9e32a982cdfa23f6d55 The 'env' man-page is currently only partially sorted. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
The 'env' man-page is currently only partially sorted.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Merge tag 'u-boot-dfu-20240419' of https://source.denx.de/u-boot/custodians/u-boot-dfu 2024-04-19T13:28:24+00:00 Tom Rini trini@konsulko.com 2024-04-19T13:28:24+00:00 c9e25d8c1d2c844ab76a7b0195f293275dcfdc6e u-boot-dfu-20240419 - new "fastboot oem board" command 
u-boot-dfu-20240419

- new "fastboot oem board" command