u-boot.git/drivers/ata/Kconfig, branch v2020.01

ata: sata_sil: Add DM support for Silicon sata driver

2019-11-19T08:41:44Z

Add DM support for Silicon(SIL3131 / SIL3132 / SIL3124) sata driver as few of the PowerPC platforms such as P series based boards need to use SATA_SIL with DM, Also fix below warning while PowerPC P series boards compilation, ===================== WARNING ======================" This board does use CONFIG_LIBATA but has CONFIG_AHCI not" enabled. Please update the storage controller driver to use" CONFIG_AHCI before the v2019.07 release." Failure to update by the deadline may result in board removal." See doc/driver-model/MIGRATION.txt for more info." ====================================================" Signed-off-by: Peng Ma Reviewed-by: Priyanka Jain

ata: fsl_sata: Add DM support for Freescale PowerPC SATA driver

2019-11-19T08:41:44Z

Add DM support for Freescale PowerPC sata driver used for PowerPC T series SoCs, CONFIG_BLK needs to be enabled on these platforms. It adds the SATA controller as AHCI device, which is strictly speaking not correct, as the controller is not AHCI compatible, But the U-Boot AHCI uclass interface enables the usage of this DM driver, Also fix below warning while PowerPC T series boards compilation, ===================== WARNING ======================" This board does use CONFIG_LIBATA but has CONFIG_AHCI not" enabled. Please update the storage controller driver to use" CONFIG_AHCI before the v2019.07 release." Failure to update by the deadline may result in board removal." See doc/driver-model/MIGRATION.txt for more info." ====================================================" Signed-off-by: Peng Ma Reviewed-by: Priyanka Jain

ata: fsl_ahci: Add sata DM support for Freescale powerpc socs

2019-05-23T14:23:09Z

This patch is to support Freescale sata driver with dts initialized. Also resolved the following problems. ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma Reviewed-by: Prabhakar Kushwaha

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

2019-04-17T13:19:45Z

- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers

sunxi: update SATA driver to always use DM_SCSI

2019-04-17T09:04:45Z

It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara Reviewed-by: Simon Glass Reviewed-by: Jagan Teki [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki

ata: dwc_ahsata: Add ahci driver model support

2019-04-13T18:30:09Z

Disable this support for cm_fx6 to avoid breakage. Signed-off-by: Soeren Moch

sata: sata_mv: Add DM support to enable CONFIG_BLK usage

2019-04-12T05:04:18Z

This patch adds DM support to the Armada XP SATA driver. This is needed to enable CONFIG_BLK on this platform. It adds the SATA controller as AHCI device, which is strictly speaking not correct, as the controller is not AHCI compatible. But the U-Boot AHCI uclass interface enables the usage of this DM driver and the creation of the corresponding BLK devices. This conversion is done to get rid of the compile warning: Reviewed-by: Chris Packham ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Stefan Roese Cc: Simon Glass Cc: Tom Rini

ata: ahci_mvebu: add scsi support

2018-05-29T06:33:05Z

Mvebu AHCI is AHCI driver which uses SCSI under the hood. This patch adjusts AHCI setup to support SCSI by creating a SCSI device as a child. Since the functions of creating SCSI device need the kconfig option DM_SCSI, so let AHCI_MVEBU select DM_SCSI. Signed-off-by: Ken Ma Reviewed-by: Stefan Roese Reviewed-by: Simon Glass Signed-off-by: Stefan Roese

ata: mvebu: move mvebu sata driver to drivers/ata directory

2018-05-29T06:33:05Z

Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma Reviewed-by: Stefan Roese Reviewed-by: Simon Glass Signed-off-by: Stefan Roese

Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig

2018-02-09T00:09:03Z

config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini