u-boot.git/drivers/ata/Makefile, branch v2024.07

scsi: Forceably finish migration to DM_SCSI

2023-11-07T23:36:06Z

The migration deadline for moving to DM_SCSI was v2023.04. A further reminder was sent out in August 2023 to the remaining platforms that had not migrated already, and that a few more over the line (or configs deleted). With this commit we: - Rename CONFIG_DM_SCSI to CONFIG_SCSI. - Remove all of the non-DM SCSI code. This includes removing other legacy symbols and code and removes some legacy non-DM AHCI code. - Some platforms that had previously been DM_SCSI=y && SCSI=n are now fully migrated to DM_SCSI as a few corner cases in the code assumed DM_SCSI=y meant SCSI=y. Signed-off-by: Tom Rini

bootstd: sata: Add bootstd support for ahci sata

2023-10-23T17:07:12Z

Add ahci sata bootdev and corresponding hunting function. Signed-off-by: Tony Dinh Reviewed-by: Simon Glass Reviewed-by: Stefan Roese

sata: Drop Silicon Image SIL3114 SATA driver

2022-02-09T14:16:48Z

This is not used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass Reviewed-by: Stefan Roese

ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI

2021-09-01T23:25:37Z

This new option allows to disable ahci-pci driver in SPL. Disabling it is needed when SPL_PCI is not enabled as ahci-pci depends on PCI. This change fixes following compile error when CONFIG_SPL_SATA_SUPPORT is enabled and SPL_PCI is disabled. LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.o: in function `ahci_probe_scsi_pci': drivers/ata/ahci.c:1205: undefined reference to `dm_pci_map_bar' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1215: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1216: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1220: undefined reference to `dm_pci_map_bar' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci-pci.o: in function `ahci_pci_probe': drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese

drivers: ata: Remove mvsata_ide driver

2021-04-10T11:59:30Z

The mvsata_ide driver was due for DM conversion by v2019.07. As that has long passed, remove the driver and disable it in the boards which had enabled it. Signed-off-by: Tom Rini

ahci: mediatek: add ahci driver

2020-08-19T21:38:15Z

add AHCI driver ported from linux https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci_mtk.c Signed-off-by: Frank Wunderlich

Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"

2020-02-25T04:46:05Z

This reverts commit 1ee494291880fd51ef0c5f7342e072bdb069d7ff. Commit 1ee494291880 ("ata: fsl_ahci: Add sata DM support for Freescale powerpc socs") introduced SCSI layer to call AHCI private API in order to support sata operations, In DM mode, This is not necessary for non-AHCI sata. So revert it and have already updated the driver itself to operate sata directly. Signed-off-by: Peng Ma Reviewed-by: Stefan Roese Reviewed-by: Priyanka Jain

ata: fsl_ahci: Add sata DM support for Freescale powerpc socs

2019-05-23T14:23:09Z

This patch is to support Freescale sata driver with dts initialized. Also resolved the following problems. ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma Reviewed-by: Prabhakar Kushwaha

sunxi: update SATA driver to always use DM_SCSI

2019-04-17T09:04:45Z

It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara Reviewed-by: Simon Glass Reviewed-by: Jagan Teki [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki

ata: mvebu: move mvebu sata driver to drivers/ata directory

2018-05-29T06:33:05Z

Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma Reviewed-by: Stefan Roese Reviewed-by: Simon Glass Signed-off-by: Stefan Roese