u-boot.git/drivers/ata/sata_mv.c, branch main

ata: sata_mv: Staticize and constify driver ops

2026-05-18T22:56:07Z

Set the ops structure as static const. The structure is not accessible from outside of this driver and is not going to be modified at runtime. Signed-off-by: Marek Vasut Reviewed-by: Simon Glass Reviewed-by: Stefan Roese

sata: sata_mv: Remove always true test

2025-10-13T14:13:21Z

Smatch reported an issue with a test that was always true in that an unsigned variable will always be >= to zero. This led to a closer look at the code which showed that some static functions returned values that were always discarded so make those functions return void. Also make the passing of block counts in those functions always use lbaint_t. Signed-off-by: Andrew Goodbody Reviewed-by: Stefan Roese

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

ata: Remove and add needed includes

2024-05-07T14:00:41Z

Remove from this driver directory and when needed add missing include files directly. Reviewed-by: Tony Dinh Signed-off-by: Tom Rini

arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdev

2023-10-16T09:10:42Z

Add hook in sata_mv probe to enable bootstd bootdev. Note: bootdev_setup_for_sibling_blk() invocation is a noop if bootsd is not enabled for ahci sata yet. Signed-off-by: Tony Dinh Reviewed-by: Simon Glass Reviewed-by: Stefan Roese

blk: Use a macro for the typical block size

2023-10-10T20:19:29Z

Avoid using the magic number 512 directly. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

blk: Switch over to using uclass IDs

2022-09-16T15:05:16Z

We currently have an if_type (interface type) and a uclass id. These are closely related and we don't need to have both. Drop the if_type values and use the uclass ones instead. Maintain the existing, subtle, one-way conversion between UCLASS_USB and UCLASS_MASS_STORAGE for now, and add a comment. Signed-off-by: Simon Glass

sata: call device_probe() after scanning

2022-04-09T19:06:31Z

Every time a sata bus/port is scanned and a new device is detected, we want to call device_probe() as it will give us a chance to run additional post-processings for some purposes. In particular, support for creating partitions on a device will be added. Signed-off-by: AKASHI Takahiro Reviewed-by: Simon Glass

arm: mvebu : sata_mv should probe all ports

2021-09-10T07:01:51Z

While a board could have multiple SATA ports, some of the ports might not have a disk attached to them. So while probing for disks, sata_mv_probe() should continue probing all ports, and skip one with no disk attached. Tests with: - Seagate Goflex Net (Marvell Kirkwood 88F6281) out-of-tree u-boot. - Zyxel NSA325 (Marvell Kirkwood 88F6282 out-of-tree u-boot. Observation: If a board has 2 or more SATA ports, and there is only one disk attached to one of the ports, sata_mv_probe() does not return a successful probe status. And if only one disk is attached to the 2nd port (i.e. port 1), it is not probed at all. Patch Description: Let sata_mv_probe() continues probing all ports, even if there is error in probing a given port, and then return a successful status if there is at least one port was probed successfully. Signed-off-by: Tony Dinh Reviewed-by: Stefan Roese