The dwc_ahci driver use platform specific defines, place the platform
specific code behind a ifdef CONFIG_ARCH_OMAP2PLUS to allow build and
use of the driver on Rockchip platform.

Fixes: 02a4b4297901 ("drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>

Update my and DPs email address to match current setup.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

The non DM code path already would enable pci bus mastering. Do the
same for the DM code path.

Fixes AHCI problems I am seeing on an Intel Apollolake device.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[trini: Use ahci_dev not dev in the calls]
Signed-off-by: Tom Rini <trini@konsulko.com>

CONFIG_SYS_SCSI_MAX_SCSI_ID is not defined if CONFIG_SCSI=n.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Building with CONFIG_AHCI_PCI=y and CONFIG_SCSI_AHCI=n leads to

    drivers/ata/ahci-pci.o: in function `ahci_pci_probe':
    drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci'

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

The controller indicates the number of ports but also has a port map
which specifies which ports are actually valid. Make use of this to
avoid trying to send commands to an invalid port.

This avoids a crash on some controllers.

Signed-off-by: Simon Glass <sjg@chromium.org>

sata_sil.c is PCI driver and without CONFIG_PCI is building of U-Boot failing:

      LD      u-boot
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_exec_cmd':
    drivers/ata/sata_sil.c:148: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_pci_probe':
    drivers/ata/sata_sil.c:687: undefined reference to `dm_pci_get_bdf'
    ld.bfd: drivers/ata/sata_sil.c:691: undefined reference to `dm_pci_read_config16'
    ld.bfd: drivers/ata/sata_sil.c:701: undefined reference to `dm_pci_map_bar'
    ld.bfd: drivers/ata/sata_sil.c:704: undefined reference to `dm_pci_map_bar'
    ld.bfd: drivers/ata/sata_sil.c:713: undefined reference to `dm_pci_write_config16'
    ld.bfd: drivers/ata/sata_sil.c:717: undefined reference to `dm_pci_read_config16'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_cmd_identify_device':
    drivers/ata/sata_sil.c:256: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd':
    drivers/ata/sata_sil.c:330: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd_ext':
    drivers/ata/sata_sil.c:377: undefined reference to `dm_pci_phys_to_bus'
    make: *** [Makefile:1778: u-boot] Error 1

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

Replace 0x1b21 by macro PCI_VENDOR_ID_ASMEDIA with the same value.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Use the word 'uclass' instead of 'if_type' to complete the conversion.

Signed-off-by: Simon Glass <sjg@chromium.org>