u-boot.git/drivers/block/Makefile, branch v2016.03

ahci: Add a disk-controller uclass

2016-01-24T04:09:39+00:00

Add a uclass ID for a disk controller. This can be used by AHCI/SATA or
other controller types. There are no operations and no interface so far,
but it is possible to probe a SATA device.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XP

2016-01-14T13:08:59+00:00

This patch adds a new SATA driver for the Marvell Kirkwood and Armada
370 / XP SoC's.

This driver supports the SATA controller of some Mavell SoC's.
Here a (most likely incomplete) list of the supported SoC's:
- Kirkwood
- Armada 370
- Armada XP

This driver implementation is an alternative to the already available
driver via the "ide" commands interface (drivers/block/mvsata_ide.c).
But this driver only supports PIO mode and as this new driver also
supports transfer via DMA, its much faster.

Please note, that the newer SoC's (e.g. Armada 38x) are not supported
by this driver. As they have an AHCI compatible SATA controller
integrated.

The original version of this driver was sent by Tor Krill to the U-Boot
list a few years ago. Here the link:

http://lists.denx.de/pipermail/u-boot/2010-June/073147.html

Changes by Stefan:
- Coding-style cleanup
- Support for Armada XP added
- MBUS window setup added
- D-cache flush and invalidation added - works with dcache enabled on
  Armada XP
- Removed mdelay() from ata_wait_register() and add timer based timeout
  detection to speed up the transfer

Signed-off-by: Tor Krill 
Signed-off-by: Stefan Roese 
Cc: Luka Perkov 
Cc: Tom Rini

drivers: block: Remove the ata_piix driver

2015-07-15T00:03:20+00:00

This driver was originally added to support the native IDE mode for
Intel chipset, however it has some bugs like not supporting ATAPI
devices, endianness issue, or even broken build when CONFIG_LAB48.
Given no board is using this driver as of today, rather than fixing
all these issues we just remove it from the source tree.

Signed-off-by: Bin Meng 
Acked-by: Simon Glass

sandbox: block driver using host file/device as backing store

2014-01-09T00:24:03+00:00

Provide a way to use any host file or device as a block device in U-Boot.
This can be used to provide filesystem access within U-Boot to an ext2
image file on the host, for example.

The support is plumbed into the filesystem and partition interfaces.

We don't want to print a message in the driver every time we find a missing
device. Pass the information back to the caller where a message can be printed
if desired.

Signed-off-by: Henrik Nordström 
Signed-off-by: Simon Glass 
- Removed change to part.c get_device_and_partition()

Signed-off-by: Simon Glass 
Reviewed-by: Simon Glass

drivers: convert makefiles to Kbuild style

2013-10-31T17:26:01+00:00

Signed-off-by: Masahiro Yamada

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

Block: Remove MG DISK support

2012-06-21T18:53:09+00:00

This driver is unused and obsolete.

Signed-off-by: Marek Vasut 
Cc: Wolfgang Denk 
Cc: unsik Kim

SATA: add driver for MX5 / MX6 SOCs

2012-05-15T06:31:30+00:00

This driver is part of Freescale's LTIB for
MX5 / MX6.

Signed-off-by: Stefano Babic 
Signed-off-by: Terry Lv 
CC: Fabio Estevam 
CC: Dirk Behme

drivers: add the support for Silicon Image SATA controller

2011-10-21T23:03:54+00:00

Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.

The features list:
	- Supports 1-lane 2.5 Gbit/s PCI Express
	- Supports one/two/four independent Serial ATA channels
	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
	- Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian 
Signed-off-by: Aaron Williams 
Tested-by: Lan Chunhe

ftide020: add faraday ide ahb controller

2011-05-12T21:41:44+00:00

Faraday's ftide020_s is an IDE-AHB controller for SoC design.
This patch add the u-boot driver (PIO) of ftide020 ATA (IDE) driver.
IDE commands include read, info, and other functions has been implemented.

Because this IDE controller support AHB interface only which is differ
from other most IDE controller supports PCI interface. Some registers
access is required during CMD/DATA I/O. Hence a configuration
"CONFIG_IDE_AHB" is required to be defined according to the feature in
cmd_ide.c.

Signed-off-by: Macpaul Lin