u-boot.git/drivers/block/mvsata_ide.c, branch master

sata: Move drivers into new drivers/ata directory

2017-07-11T16:08:19+00:00

At present we have the SATA and PATA drivers mixed up in the drivers/block
directory. It is better to split them out into their own place. Use
drivers/ata which is what Linux does.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Use correct spelling of "U-Boot"

2016-02-06T11:00:59+00:00

Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Reviewed-by: Simon Glass 
Reviewed-by: Minkyu Kang

arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig

2016-01-14T13:08:59+00:00

Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.

Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.

And CONFIG_DDR3 is removed, as its not referenced anywhere.

Signed-off-by: Stefan Roese 
Cc: Luka Perkov

arm: mvebu: add Armada XP SATA support

2015-07-23T06:30:58+00:00

This patch initializes the SATA address windows on Armada XP and
allows it to work with the existing mvsata_ide driver.
It also adds the necessary configuration for the db-mv784mp-gp board.

Signed-off-by: Anton Schubert 
Tested-by: Stefan Roese 
Cc: Luka Perkov

arm: marvell: Move arch/kirkwood.h to arch/soc.h

2014-10-23T13:59:20+00:00

This move makes is possible to use this header not only from kirkwood
platforms but from all Marvell mvebu platforms.

Signed-off-by: Stefan Roese 
Tested-by: Luka Perkov 
Acked-by: Prafulla Wadaskar

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

mvsata_ide.c: Correction of typo in comments

2013-03-11T21:00:28+00:00

Signed-off-by: Gray Remlin

mvsata: fix ide_preinit for missing disks

2011-12-06T22:59:30+00:00

Consider that ide_preinit() succeed if at least one port is successfully
initialized. This allows to iniatialize IDE support on a board with two
SATA ports but a single hard disk available.

Signed-off-by: Simon Guinot

mvsata: issue hard reset on initialization

2011-05-23T06:58:32+00:00

Before the actual initialization do a hard reset of the SATA port and the
connected device.

changes v1->v2:
 - add comment for udelay

Signed-off-by: Michael Walle 
Cc: Prafulla Wadaskar 
Cc: Albert Aribaud

Replace obsolete e-mail address

2011-04-27T17:38:09+00:00

Signed-off-by: Albert ARIBAUD