u-boot.git/drivers/block, branch v2012.07-rc2

Remove remaining mdelay() macros

2012-07-08T20:15:08+00:00

Drop mdelay() macros since we already have a common mdelay() func.

Signed-off-by: Anatolij Gustschin 
Acked-by: Mike Frysinger

Block: Remove MG DISK support

2012-06-21T18:53:09+00:00

This driver is unused and obsolete.

Signed-off-by: Marek Vasut 
Cc: Wolfgang Denk 
Cc: unsik Kim

SATA: add driver for MX5 / MX6 SOCs

2012-05-15T06:31:30+00:00

This driver is part of Freescale's LTIB for
MX5 / MX6.

Signed-off-by: Stefano Babic 
Signed-off-by: Terry Lv 
CC: Fabio Estevam 
CC: Dirk Behme

Blackfin: pata_bfin: fix printf warning

2012-02-12T20:03:26+00:00

pata_bfin.c: In function 'bfin_ata_identify':
pata_bfin.c:887:2: warning: format '%x' expects type 'unsigned int',
	but argument 2 has type 'lbaint_t'

Signed-off-by: Mike Frysinger

mvsata: fix ide_preinit for missing disks

2011-12-06T22:59:30+00:00

Consider that ide_preinit() succeed if at least one port is successfully
initialized. This allows to iniatialize IDE support on a board with two
SATA ports but a single hard disk available.

Signed-off-by: Simon Guinot

drivers/block/sata_dwc.c: Fix GCC 4.6 build warning

2011-12-01T23:10:51+00:00

Fix:
sata_dwc.c: In function 'scan_sata':
sata_dwc.c:535:38: warning: variable 'udma_mask' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk 
Cc: Kazuaki Ichinohe

powerpc/85xx: always implement the work-around for Erratum SATA_A001

2011-11-29T14:48:06+00:00

On the P1022/P1013, the work-around for erratum SATA_A001 was implemented
only if U-Boot initializes SATA, but SATA is not initialized by default.  So
move the work-around to the CPU initialization function, so that it's always
executed on the SOCs that need it.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

ftide020: fix incorrect information display format

2011-11-18T09:26:14+00:00

Fix incorrect information display format when probing the device.

Signed-off-by: Macpaul Lin

sata_dwc.c: Fix GCC 4.6 build warnings

2011-11-16T20:16:33+00:00

Fix:
sata_dwc.c: In function 'sata_dwc_softreset':
sata_dwc.c:444:5: warning: variable 'status' set but not used [-Wunused-but-set-variable]
sata_dwc.c:443:6: warning: variable 'serror' set but not used [-Wunused-but-set-variable]
sata_dwc.c: In function 'scan_sata':
sata_dwc.c:654:16: warning: variable 'lba_desc' set but not used [-Wunused-but-set-variable]
sata_dwc.c:538:16: warning: variable 'xfer_mask' set but not used [-Wunused-but-set-variable]
sata_dwc.c: In function 'ata_dev_read_id':
sata_dwc.c:747:14: warning: variable 'reason' set but not used [-Wunused-but-set-variable]
sata_dwc.c: In function 'ata_dev_read_sectors':
sata_dwc.c:1810:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
sata_dwc.c: In function 'ata_dev_write_sectors':
sata_dwc.c:1994:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]

Signed-off-by: Stefan Roese

drivers/block/sym53c8xx.c: Fix GCC 4.6 build warning

2011-11-16T20:01:49+00:00

Fix:
sym53c8xx.c: In function 'scsi_write_dsp':
sym53c8xx.c:456:16: warning: variable 'val' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk