u-boot.git/drivers/block, branch v2012.10 Unnamed repository; edit this file 'description' to name the repository. remove unnecessary code in ata_piix 2012-09-28T17:40:30+00:00 Pavel Herrmann morpheus.ibis@gmail.com 2012-09-27T23:18:03+00:00 b726a01b76ed06a0aec3a24879f8efce2d7f7005 We set sata_curr_device to 0 right after returning from init_sata(), so there's no point in setting it to the last scanned driver at this point. Note: there are more duplicities with cmd_sata, but those might be required, as the code seems to reset the entire controller on every scan, ignoring the requested port number. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> 
We set sata_curr_device to 0 right after returning from init_sata(), so there's
no point in setting it to the last scanned driver at this point.
Note: there are more duplicities with cmd_sata, but those might be required,
as the code seems to reset the entire controller on every scan, ignoring the
requested port number.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
block: systemace: Simplify base and width initialization 2012-09-11T07:24:16+00:00 Michal Simek monstr@monstr.eu 2012-07-04T10:09:45+00:00 5340a7f1d74ba65c4c63d6d9d0ad606553866ffe Use CONFIG parameters only at one location to simplify the code. Also create ace_readw/writew functions. Signed-off-by: Michal Simek <monstr@monstr.eu> 
Use CONFIG parameters only at one location to simplify
the code. Also create ace_readw/writew functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Remove remaining mdelay() macros 2012-07-08T20:15:08+00:00 Anatolij Gustschin agust@denx.de 2012-04-24T22:43:23+00:00 fe749d3728b281cd0b986c82eed30c64b3450ce7 Drop mdelay() macros since we already have a common mdelay() func. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> 
Drop mdelay() macros since we already have a common mdelay() func.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Block: Remove MG DISK support 2012-06-21T18:53:09+00:00 Marek Vasut marex@denx.de 2012-03-04T15:11:32+00:00 b37d41aa24aedd84f718d019e5b7a27a06aa73fc This driver is unused and obsolete. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: unsik Kim <donari75@gmail.com> 
This driver is unused and obsolete.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: unsik Kim <donari75@gmail.com>
SATA: add driver for MX5 / MX6 SOCs 2012-05-15T06:31:30+00:00 Stefano Babic sbabic@denx.de 2012-02-22T00:24:39+00:00 9f472e6540f5632ce27b779d841a006d1c1b3d55 This driver is part of Freescale's LTIB for MX5 / MX6. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Terry Lv <r65388@freescale.com> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Dirk Behme <dirk.behme@de.bosch.com> 
This driver is part of Freescale's LTIB for
MX5 / MX6.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Terry Lv <r65388@freescale.com>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Dirk Behme <dirk.behme@de.bosch.com>
Blackfin: pata_bfin: fix printf warning 2012-02-12T20:03:26+00:00 Mike Frysinger vapier@gentoo.org 2012-02-03T13:04:22+00:00 44f67f784889e1a27958fa3e995abe41ab925697 pata_bfin.c: In function 'bfin_ata_identify': pata_bfin.c:887:2: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'lbaint_t' Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
pata_bfin.c: In function 'bfin_ata_identify':
pata_bfin.c:887:2: warning: format '%x' expects type 'unsigned int',
	but argument 2 has type 'lbaint_t'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mvsata: fix ide_preinit for missing disks 2011-12-06T22:59:30+00:00 Simon Guinot simon.guinot@sequanux.org 2011-11-21T13:55:46+00:00 2cb4fade0ef00ebf485db05d6aab4acd8897ecf9 Consider that ide_preinit() succeed if at least one port is successfully initialized. This allows to iniatialize IDE support on a board with two SATA ports but a single hard disk available. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> 
Consider that ide_preinit() succeed if at least one port is successfully
initialized. This allows to iniatialize IDE support on a board with two
SATA ports but a single hard disk available.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
drivers/block/sata_dwc.c: Fix GCC 4.6 build warning 2011-12-01T23:10:51+00:00 Wolfgang Denk wd@denx.de 2011-11-29T22:17:46+00:00 24ec52dec298ffb5298cd57ddd3567fe00347988 Fix: sata_dwc.c: In function 'scan_sata': sata_dwc.c:535:38: warning: variable 'udma_mask' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kazuaki Ichinohe <kazuichi@fsi.co.jp> 
Fix:
sata_dwc.c: In function 'scan_sata':
sata_dwc.c:535:38: warning: variable 'udma_mask' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kazuaki Ichinohe <kazuichi@fsi.co.jp>
powerpc/85xx: always implement the work-around for Erratum SATA_A001 2011-11-29T14:48:06+00:00 Timur Tabi timur@freescale.com 2011-11-21T23:10:23+00:00 fbc20aab119b70119a2c1db7dfbecb4a6ee0f6a5 On the P1022/P1013, the work-around for erratum SATA_A001 was implemented only if U-Boot initializes SATA, but SATA is not initialized by default. So move the work-around to the CPU initialization function, so that it's always executed on the SOCs that need it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
On the P1022/P1013, the work-around for erratum SATA_A001 was implemented
only if U-Boot initializes SATA, but SATA is not initialized by default.  So
move the work-around to the CPU initialization function, so that it's always
executed on the SOCs that need it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
ftide020: fix incorrect information display format 2011-11-18T09:26:14+00:00 Macpaul Lin macpaul@andestech.com 2011-09-23T09:54:34+00:00 b9016034f52e68d149cc523c91aef5a0801f9bbe Fix incorrect information display format when probing the device. Signed-off-by: Macpaul Lin <macpaul@andestech.com> 
Fix incorrect information display format when probing the device.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>