u-boot.git/drivers/block, branch v2016.03

Use correct spelling of "U-Boot"

2016-02-06T11:00:59+00:00

Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Reviewed-by: Simon Glass 
Reviewed-by: Minkyu Kang

ahci: Add a disk-controller uclass

2016-01-24T04:09:39+00:00

Add a uclass ID for a disk controller. This can be used by AHCI/SATA or
other controller types. There are no operations and no interface so far,
but it is possible to probe a SATA device.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Fix GCC format-security errors and convert sprintfs.

2016-01-15T03:11:34+00:00

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten 
Acked-by: Wolfgang Denk 
Reviewed-by: Tom Rini

Merge git://www.denx.de/git/u-boot-marvell

2016-01-14T16:23:05+00:00

Conflicts:
	arch/arm/Kconfig

Signed-off-by: Tom Rini

arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig

2016-01-14T13:08:59+00:00

Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.

Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.

And CONFIG_DDR3 is removed, as its not referenced anywhere.

Signed-off-by: Stefan Roese 
Cc: Luka Perkov

sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XP

2016-01-14T13:08:59+00:00

This patch adds a new SATA driver for the Marvell Kirkwood and Armada
370 / XP SoC's.

This driver supports the SATA controller of some Mavell SoC's.
Here a (most likely incomplete) list of the supported SoC's:
- Kirkwood
- Armada 370
- Armada XP

This driver implementation is an alternative to the already available
driver via the "ide" commands interface (drivers/block/mvsata_ide.c).
But this driver only supports PIO mode and as this new driver also
supports transfer via DMA, its much faster.

Please note, that the newer SoC's (e.g. Armada 38x) are not supported
by this driver. As they have an AHCI compatible SATA controller
integrated.

The original version of this driver was sent by Tor Krill to the U-Boot
list a few years ago. Here the link:

http://lists.denx.de/pipermail/u-boot/2010-June/073147.html

Changes by Stefan:
- Coding-style cleanup
- Support for Armada XP added
- MBUS window setup added
- D-cache flush and invalidation added - works with dcache enabled on
  Armada XP
- Removed mdelay() from ata_wait_register() and add timer based timeout
  detection to speed up the transfer

Signed-off-by: Tor Krill 
Signed-off-by: Stefan Roese 
Cc: Luka Perkov 
Cc: Tom Rini

block: pass block dev not num to read/write/erase()

2016-01-14T02:05:18+00:00

This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren 
Reviewed-by: Tom Rini

dm: ahci: Convert to use new DM PCI API

2016-01-12T17:19:09+00:00

Convert this driver to use the new driver model PCI API.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Fix typo: firstly -> first.

2015-12-05T23:22:23+00:00

Signed-off-by: Vagrant Cascadian 
Acked-by: Marek Vasut

Fix typo: commmand -> command.

2015-12-05T23:22:21+00:00

Signed-off-by: Vagrant Cascadian 
Reviewed-by: Joe Hershberger