u-boot.git/drivers/cfi_flash.c, branch master Unnamed repository; edit this file 'description' to name the repository. drivers/mtd : move mtd drivers to drivers/mtd 2007-11-25T22:28:52+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2007-11-24T20:26:56+00:00 59829cc189378c142c13d2aa8d9a897d8bef3961 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[PATCH v3] Add sync to ensure flash_write_cmd is fully finished 2007-02-21T15:52:31+00:00 Haiying Wang Haiying.Wang@freescale.com 2007-02-21T15:52:31+00:00 3a197b2fe49d6fa03978e60af2394efe9c70b527 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command is fully finished. The sync() is defined in each CPU's io.h file. For those CPUs which do not need sync for now, a dummy sync() is defined in their io.h as well. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> 
Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
is fully finished. The sync() is defined in each CPU's io.h file. For
those CPUs which do not need sync for now, a dummy sync() is defined in
their io.h as well.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
[PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver 2007-01-19T17:05:26+00:00 Heiko Schocher hs@pollux.denx.de 2007-01-19T17:05:26+00:00 d0b6e14087ddd8789f224a48e1d33f2a5df4d167 if you must swap the bytes between reading/writing. (Needed for the SC3 board) Signed-off-by: Heiko Schocher <hs@denx.de> 
             if you must swap the bytes between reading/writing.
             (Needed for the SC3 board)

Signed-off-by: Heiko Schocher <hs@denx.de>
[PATCH] Fix: Compilerwarnings for SC3 board. 2007-01-18T10:28:51+00:00 Heiko Schocher hs@pollux.denx.de 2007-01-18T10:28:51+00:00 cb4820725e9fc409c5cbc8e83054a6ed522d2111 The EBC Configuration Register is now by CFG_EBC_CFG definable Added JFFS2 support for the SC3 board. Signed-off-by: Heiko Schocher <hs@denx.de> 
             The EBC Configuration Register is now by CFG_EBC_CFG definable
             Added JFFS2 support for the SC3 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Added support for the SOLIDCARD III board from Eurodesign 2007-01-11T14:44:44+00:00 Heiko Schocher hs@pollux.denx.de 2007-01-11T14:44:44+00:00 ca43ba18e910206ef8063e4b22d282630bff3fd2 Signed-off-by: Heiko Schocher <hs@denx.de> 
    Signed-off-by: Heiko Schocher <hs@denx.de>
Fix bug in adaption of Stefano Babic's CFI driver patch. 2006-12-27T00:26:13+00:00 Wolfgang Denk wd@pollux.denx.de 2006-12-27T00:26:13+00:00 92eb729bad876725aeea908d2addba0800620840 






Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
2006-12-24T00:27:41+00:00

Stefano Babic
sbabic@denx.de

2006-12-11T23:22:42+00:00

d784fdb05900ada3686d5778783e1fb328e9fb66












[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
2006-11-13T12:58:55+00:00

Stefan Roese
sr@denx.de

2006-11-13T12:55:24+00:00

260421a21e934a68d31fb6125b0fbd2631a8ca20

   * Adds support for AMD command set Top Boot flash geometry reversal
   * Adds support for reading JEDEC Manufacturer ID and Device ID
   * Adds support for displaying command set, manufacturer id and
     device ids (flinfo)
   * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
   * Removes outdated change history (refer to git log instead)

Signed-off-by: Tolunay Orkun <listmember@orkun.us>
Signed-off-by: Stefan Roese <sr@denx.de>





   * Adds support for AMD command set Top Boot flash geometry reversal
   * Adds support for reading JEDEC Manufacturer ID and Device ID
   * Adds support for displaying command set, manufacturer id and
     device ids (flinfo)
   * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
   * Removes outdated change history (refer to git log instead)

Signed-off-by: Tolunay Orkun <listmember@orkun.us>
Signed-off-by: Stefan Roese <sr@denx.de>







Fix watchdog handling in CFI flash driver
2006-06-02T09:46:20+00:00

Wolfgang Denk
wd@pollux.denx.de

2006-06-02T09:46:20+00:00

62b8f54877665e8f99ed1f0b9bb3d4e21e31ef41

Just use udelay() when waiting for status changes which will
implicitely trigger the watchdog.





Just use udelay() when waiting for status changes which will
implicitely trigger the watchdog.







Fix watchdog issues for ColdFire boards.
2006-05-09T11:49:12+00:00

Wolfgang Denk
wd@pollux.denx.de

2006-05-09T11:49:12+00:00

4af099bda90fe602aff96b2fd914fca89f320c5c