u-boot.git/drivers/clk/clk-composite.c, branch master

clk: imx: Pass CCM udevice into clk_register_composite()

2025-04-28T13:42:01+00:00

Pass the clock controller udevice into clk_register_composite(),
so it can be passed further to any registered composite clocks
and used for look up of parent clock referenced in DT "clocks"
and "clock-names" properties by phandle and name pair.

Use the clock controller udevice in imx8m_clk_mux_set_parent()
to perform accurate look up of parent clock referenced in the
CCM driver by name. If the clock name that is being looked up
matches one of the names listed in the clock controller DT node
"clock-names" array property, then the offset of the name is
looked up in the "clocks" DT property and the phandle at that
offset is resolved to the parent clock udevice. The test to
determine whether a particular driver instance registered with
clock uclass matches the parent clock is done by comparing the
OF nodes of the clock registered with clock uclass and parent
clock resolved from the phandle.

Example:

drivers/clk/imx/clk-imx8mm.c:
static const char * const imx8mm_a53_sels[] = {"osc_24m", "arm_pll_out", ...
                                      _____________|
arch/arm/dts/imx8mm.dtsi:            |
clk: clock-controller@30380000 {     v
        clock-names = "osc_32k", "osc_24m", ...
	                           |
				   v
        clocks = <&osc_32k>, <&osc_24m>, ...
};          _______________________|
...        |
/ {        v
        osc_24m: clock-osc-24m {
                compatible = "fixed-clock";
...
};

Signed-off-by: Marek Vasut 
Reported-by: Francesco Dolcini 
Tested-by: Fabio Estevam 
Tested-by: Adam Ford  # imx8mp-beacon

clk: clk-composite: Resolve parent clock by name

2025-03-24T11:51:34+00:00

Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.

Signed-off-by: Marek Vasut

clk: clk-composite: Use struct udevice instead of struct device

2025-03-24T11:51:34+00:00

Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-composite registration.

Signed-off-by: Marek Vasut

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

clk: Remove and add needed includes

2024-05-07T14:00:41+00:00

Remove  from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini

clk: Check that composite clock's div has set_rate()

2023-12-15T17:32:00+00:00

It's possible for composite clocks to have a divider that does not
implement set_rate() operation. For example, sandbox_clk_composite()
registers composite clock with a divider that only has get_rate().
Currently clk_composite_set_rate() only checks thate rate_ops are
present, so for sandbox it will cause NULL dereference during
clk_set_rate().

This patch adds rate_ops->set_rate check tp clk_composite_set_rate().

Signed-off-by: Igor Prusov 
Reviewed-by: Sean Anderson 
Link: https://lore.kernel.org/r/20231205232334.2931-2-ivprusov@salutedevices.com

clk: define LOG_CATEGORY for generic and ccf clocks

2021-12-15T17:16:16+00:00

Define LOG_CATEGORY to allow filtering with log command
for generic clock and CCF clocks.

This patch also change existing printf, debug and pr_ macro
to log_ or dev_ macro.

Signed-off-by: Patrick Delaunay 
Reviewed-by: Sean Anderson

clk: cosmetic: reorder include files

2021-12-15T17:16:16+00:00

Reorder include files in the U-Boot expected order:

the common.h header should always be first,
followed by other headers in order,
then headers with directories,
then local files.

It is a preliminary step for next patch.

Signed-off-by: Patrick Delaunay 
Reviewed-by: Sean Anderson

clk: Return -ENOSYS when system call is not available

2021-04-06T04:33:19+00:00

Update clk_composite_set_parent() to use -ENOSYS, which is the correct
error code for U-Boot. Also rearrange the code so that the error condition
is clearly indicated and the function runs to the end in the normal case,
since this is the common style in U-Boot.

Signed-off-by: Simon Glass 
Reviewed-by: Sean Anderson