u-boot.git/drivers/clk/clk_versaclock.c, branch master

clk: versaclock: Use IS_ERR check before dereference

2025-10-28T15:48:28+00:00

In versaclock_probe vc5->pin_xin may be an error pointer so need to
check with IS_ERR before attempting to dereference it.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody

clk: versaclock: return value calculated by ERR_PTR

2025-10-28T15:48:27+00:00

In versaclock_get_name -ENOMEM is passed to ERR_PTR but nothing is
done with the value that this calculates which is obviously not the
intention of the code. This is confirmed by the code around where this
function is called.
Instead return the value from ERR_PTR.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

clk: Remove and add needed includes

2024-05-07T14:00:41+00:00

Remove  from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini

treewide: Remove clk_free

2024-01-30T03:35:02+00:00

This function is a no-op. Remove it.

Signed-off-by: Sean Anderson 
Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com

ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7

2023-02-02T00:49:19+00:00

Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut 
Signed-off-by: Tam Nguyen  # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham  # r8a779a0-falcon-u-boot.dts

clk: versaclock: Remove xlate function

2022-02-25T04:58:13+00:00

This function is the same as the default xlate. Remove it.

Signed-off-by: Sean Anderson 
Reviewed-by: Adam Ford 
Link: https://lore.kernel.org/r/20211201201317.2174547-1-seanga2@gmail.com

treewide: invaild -> invalid

2022-01-13T12:57:49+00:00

Somewhere along the way, someone misspelt "invalid" and it got copied
everywhere. Fix it.

Signed-off-by: Sean Anderson 
Reviewed-by: Alexander Dahl 
Reviewed-by: Simon Glass

clk: clk_versaclock: Add support for versaclock driver

2021-08-21T22:23:02+00:00

The driver is based on the Versaclock driver from the Linux code, but
due differences in the clock API between them, some pieces had to be
changed.

This driver creates a mux, pfd, pll, and a series of fod ouputs.
 Rate               Usecnt      Name
------------------------------------------
 25000000             0        `-- x304-clock
 25000000             0            `-- clock-controller@6a.mux
 25000000             0                |-- clock-controller@6a.pfd
 2800000000           0                |   `-- clock-controller@6a.pll
 33333333             0                |       |-- clock-controller@6a.fod0
 33333333             0                |       |   `-- clock-controller@6a.out1
 33333333             0                |       |-- clock-controller@6a.fod1
 33333333             0                |       |   `-- clock-controller@6a.out2
 50000000             0                |       |-- clock-controller@6a.fod2
 50000000             0                |       |   `-- clock-controller@6a.out3
 125000000            0                |       `-- clock-controller@6a.fod3
 125000000            0                |           `-- clock-controller@6a.out4
 25000000             0                `-- clock-controller@6a.out0_sel_i2cb

A translation function is added so the references to <&versaclock X> get routed
to the corresponding clock-controller@6a.outX.

Signed-off-by: Adam Ford 
Reviewed-by: Sean Anderson