u-boot.git/drivers/clk, branch v2022.10

clk: imx: Add initial support for i.MXRT1170 clock driver

2022-09-18T18:42:56Z

Add clock driver support for i.MXRT1170. Signed-off-by: Jesse Taube

clk: imx: Add i.MXRT11xx pllv3 variant

2022-09-18T18:42:56Z

The i.MXRT11 series has two new pll types but are variants of existing. This patch adds the ability to read one of the pll types' frequency as it can't be changed unlike the generic pll it also has the division factors swapped. Signed-off-by: Jesse Taube

Merge tag 'u-boot-stm32-20220907' of https://source.denx.de/u-boot/custodians/u-boot-stm

2022-09-08T12:33:41Z

- simplify the STM32MP15x package parsing code - remove test on CONFIG_DM_REGULATOR in stm32mp1 board and enable CONFIG_DM_REGULATOR for stm32f769-disco - handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start' after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>) - Fix SYS_HZ_CLOCK value for stih410-b2260 board - Switch STMM32MP15x DHSOM to FMC2 EBI driver - Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel

Merge https://source.denx.de/u-boot/custodians/u-boot-riscv

2022-09-06T13:01:39Z

clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC

2022-09-06T11:54:50Z

Handle the input clock of RCC USB_PHY_48, provided by USBPHYC and named "ck_usbo_48m". Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

dt-bindings: clock: sifive: sync FU740 PRCI clock binding header

2022-09-06T05:00:15Z

This commit sychronizes the header file for FU740 PRCI clocks with the one from Linux 5.19. The constant values are the same, but all constant names are changed (most are just prefixed with FU740_). Signed-off-by: Icenowy Zheng Reviewed-by: Leo Yu-Chi Liang

clk: rockchip: rk3399: Fix Unknown clock 77 on mmc@fe310000

2022-09-04T12:00:39Z

Adding some debug prints I can see: MMC: mmc@fe320000: Got clock clock-controller@ff760000 76 mmc@fe310000: Got clock clock-controller@ff760000 77 Unknown clock 77 rockchip_dwmmc_get_mmc_clk: err=-2 mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0 According to kernel code the SDIO clock is identical to SDMMC clock except for the con 16->15 change. Add support for the clock to avoid the error. Signed-off-by: Michal Suchanek Reviewed-by: Kever Yang

treewide: Fix Marek's name and change my e-mail address

2022-07-21T08:14:04Z

Fix diacritics in some instances of my name and change my e-mail address to kabel@kernel.org. Add corresponding .mailmap entries. Signed-off-by: Marek Behún Reviewed-by: Stefan Roese

reset: sunxi: Reuse the platform data from the clock driver

2022-07-18T08:37:50Z

The clock and reset drivers use the exact same platform data. Simplify them by sharing the object. This is safe because the parent device (the clock device) always gets its driver model callbacks run first. Signed-off-by: Samuel Holland Acked-by: Andre Przywara Signed-off-by: Andre Przywara

clk: sunxi: Convert driver private data to platform data

2022-07-18T08:37:50Z

All of the driver private data should really be platform data since it is determined statically (selected by the compatible string or extracted from the devicetree). Move everything to platform data, so it can be provided when binding the driver. This is useful for SPL, or for instantiating the driver as part of an MFD. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara