u-boot.git/drivers/core/root.c, branch v2021.07-rc2

dm: core: Fix uninitialized return value from dm_scan_fdt_node

2021-04-29T10:23:39+00:00

If there are no nodes or if all nodes are disabled, this function would
return err without setting it first. Fix this by initializing err to
zero.

Fixes: 94f7afdf7e ("dm: core: Ignore disabled devices when binding")

Signed-off-by: Sean Anderson 
Reviewed-by: Simon Glass

dm: core: Use separate priv/plat data region

2021-03-26T04:03:09+00:00

Make use of the new priv/plat data region if enabled. This is implemented
as a simple offset from the position set up by dtoc to the new position.

So long as all access goes through dm_priv_to_rw() this is safe.

Signed-off-by: Simon Glass 
Signed-off-by: Simon Glass

dm: core: Allow storing priv/plat data separately

2021-03-26T04:03:09+00:00

At present the device priv/data data allocated by dtoc is stored in the
data section along with other variables. On some platforms it is better
to allocate space for it separately, e.g. if SPL is running from read-only
memory.

Create a new space with the same size as that allocated by dtoc, ready for
use.

Signed-off-by: Simon Glass 
Signed-off-by: Simon Glass

dm: core: Create a struct for device runtime info

2021-03-26T04:03:09+00:00

At present when driver model needs to change a device it simply updates
the struct udevice structure. But with of-platdata-inst most of the fields
are not modified at runtime. In fact, typically only the flags need to
change.

For systems running SPL from read-only memory it is convenient to separate
out the runtime information, so that the devices don't need to be copied
before being used.

Create a new udevice_rt table, similar to the existing driver_rt. For now
it just holds the flags, although they are not used in this patch.

Add a new Kconfig for the driver_rt data, since this is not needed when
of-platdata-inst is used.

Signed-off-by: Simon Glass 
Signed-off-by: Simon Glass

dm: core: Set up driver model for OF_PLATDATA_INST

2021-03-22T06:23:28+00:00

With this we don't need to scan and bind drivers, not even the root
device. We just need to locate the root device that was set up at build
time, then set our root in global_data to point to it.

Update the code to handle this case.

Signed-off-by: Simon Glass 
Signed-off-by: Simon Glass

dm: core: Adjust uclass setup with of-platdata

2021-03-22T06:23:28+00:00

When OF_PLATDATA_INST is enabled we don't need to create the uclass list.
Instead we just need to point to the existing list. Update the code
accordingly.

Signed-off-by: Simon Glass 
Signed-off-by: Simon Glass

Merge branch '2021-02-02-drop-asm_global_data-when-unused'

2021-02-15T15:16:45+00:00

- Merge the patch to take  out of

dm: core: Add late driver remove option

2021-02-03T10:38:41+00:00

Add another flag to the DM core which could be assigned to drivers and
which makes those drivers call their remove callbacks last, just before
booting OS and after all the other drivers finished with their remove
callbacks. This is necessary for things like clock drivers, where the
other drivers might depend on the clock driver in their remove callbacks.
Prime example is the mmc subsystem, which can reconfigure a card from HS
mode to slower modes in the remove callback and for that it needs to
reconfigure the controller clock.

Signed-off-by: Marek Vasut 
Signed-off-by: Simon Glass

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

fdt: translate address if #size-cells = <0>

2021-01-12T05:28:05+00:00

The __of_translate_address routine translates an address from the
device tree into a CPU physical address. A note in the description of
the routine explains that the crossing of any level with
since inherited from IBM. This does not happen for Texas Instruments, or
at least for the beaglebone device tree. Without this patch, in fact,
the translation into physical addresses of the registers contained in the
am33xx-clocks.dtsi nodes would not be possible. They all have a parent
with #size-cells = <0>.

The CONFIG_OF_TRANSLATE_ZERO_SIZE_CELLS symbol makes translation
possible even in the case of crossing levels with #size-cells = <0>.

The patch acts conservatively on address translation, except for
removing a check within the of_translate_one function in the
drivers/core/of_addr.c file:

+
        ranges = of_get_property(parent, rprop, &rlen);
-       if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
-               debug("no ranges; cannot translate\n");
-               return 1;
-       }
        if (ranges == NULL || rlen == 0) {
                offset = of_read_number(addr, na);
                memset(addr, 0, pna * 4);
		debug("empty ranges; 1:1 translation\n");

There are two reasons:
1 The function of_empty_ranges_quirk always returns false, invalidating
  the following if statement in case of null ranges. Therefore one of
  the two checks is useless.

2 The implementation of the of_translate_one function found in the
  common/fdt_support.c file has removed this check while keeping the one
  about the 1:1 translation.

The patch adds a test and modifies a check for the correctness of an
address in the case of enabling translation also for zero size cells.
The added test checks translations of addresses generated by nodes of
a device tree similar to those you can find in the files am33xx.dtsi
and am33xx-clocks.dtsi for which the patch was created.

The patch was also tested on a beaglebone black board. The addresses
generated for the registers of the loaded drivers are those specified
by the AM335x reference manual.

Signed-off-by: Dario Binacchi 
Tested-by: Dario Binacchi 
Reviewed-by: Simon Glass