This patch is used to add the imx type string of i.MX952 so that the i.MX952 CPU info can be printed. Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and drop the unnecessary inclusion of asm/global_data.h. Headers should be included directly by the files that need them, rather than indirectly via global_data.h. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards Acked-by: Yao Zi <me@ziyao.cc> #TH1520 Signed-off-by: Peng Fan <peng.fan@nxp.com>
Linux kernel .get_temp() callback reports values in millicelsius, U-Boot currently reports them in celsius. Align the two and report in millicelsius. Update drivers accordingly. Update callsites that use thermal_get_temp() as well. The 'temperature' command now reports temperature in millicelsius as well, with additional accuracy. This changes command line ABI slightly. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: David Zang <davidzangcs@gmail.com> [trini: Update test/cmd/temperature.c] Signed-off-by: Tom Rini <trini@konsulko.com>
Add a case for i.MX94 to return the correct string identifier in the get_imx_type_str() function. This ensures proper CPU type reporting for i.MX94 platforms. Signed-off-by: Alice Guo <alice.guo@nxp.com>
Add setting default temperatures to the weak version of get_cpu_temp_grade so these values will not be used uninitialised. This issue was found by Smatch. Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
This patch is used to add the imx type string of i.MX95 ao that the i.MX95 CPU info can be printed. Signed-off-by: Alice Guo <alice.guo@nxp.com>
Much of the data that is display by imx8_cpu.c is also displayed from arch/arm/mach-imx/cpu.c, except the temperature grade and active temperature are only displayed when SoC is an i.MX9. Since IMX9 now implies IMX_TMU, change this to check for IMX_TMU in the same way it's done in mach-imx/cpu.c to enable displaying this information for any SoC with either of this config enabled. Since additional text may appear due to this commit, remove the extra space in the message displaying the temperature grade. Before: CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz Model: Beacon EmbeddedWorks i.MX8MPlus Development kit After: CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz CPU: Industrial temperature grade (-40C to 105C) at 28C Model: Beacon EmbeddedWorks i.MX8MPlus Development kit Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The imx8_cpu is capable of running on IMX8, IMX8M, and IMX9 families, but the CPU list is limited on the 8M variants. Expand this list to show more variants and their respective names. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
iMX91 is reduced part from iMX93 with part number: i.MX9131/11/01 It removed A55_1, M33, MIPI DSI, LVDS, etc. i.MX9131: - Support 2.4GT/s DDR and HWFFC at 1.2GT/s i.MX9121: - A55 at 800Mhz and DDR at 1600MTS, with low drive mode. i.MX9111: - Support 1.6GT/s DDR and HWFFC at 800MT/s i.MX9101: - Support 800Mhz ARM clock - Support 1.6GT/s DDR and HWFFC at 800MT/s - No parallel display, eQOS, flexcan Updated Clock/Container/CPU and etc for i.MX91 Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
U-Boot device tree is padded just after U-Boot proper. After the whole stuff loaded to DRAM space, the device tree area is conflict with BSS region before U-Boot relocation. So any write to BSS area before reloc_fdt will corrupt the device tree. Without the fix, there is issue that “binman_init failed:-2” on i.MX8MP-EVK board. Drop 'revision' and use malloc area in cpu_imx_plat->rev. Signed-off-by: Peng Fan <peng.fan@nxp.com>