During entropy evaluation, if the generated samples fail any statistical test,
then, all of the bits will be discarded, and a second set of samples will be
generated and tested.

Double the ent_delay to give more chance to pass before performing retry.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

This reverts commit 159b6f0e119962ce5da645f548cefe9196c8778e.

Since commit 159b6f0e1199 ("caam: Fix CAAM error on startup") the following
regression was reported by Tim Harvey:

"I've found that this patch causes a regression on an imx8mm board
(imx8mm_venice_defconfig) where the first call to caam_rng_read fails
here in jr_dequeue but if you call it again it works. With some
debugging added:
SEC0:  RNG instantiated
...
Hit any key to stop autoboot:  0
u-boot=> rng list
RNG #0 - caam-rng
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
Error in SEC deq: -1
caam_rng_read_one run_descriptor_jr failed: -1
caam_rng_read caam-rng caam_rng_read_one failed: -5
Reading RNG failed
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
00000000: ad 2e ad c0 2a 12 27 c4 65 82 66 19 be ef f6 07  ....*.'.e.f.....

If I revert your patch caam_rng_read works initially and on subsequent
calls."

" I ran into this when I was testing
lwIP HTTPS as it causes anything that uses dm_rng to fail the first
time (such as HTTPS)."

Revert it for now to avoid the regression.

Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>

In rare cases U-Boot returns an error message when intantiating the RNG
of the CAAM device:
“SEC0:  RNG4 SH0 instantiation failed with error 0xffffffff”
This  means, that even when the CAAM device reports a finished
descriptor, none is found in the output ring.
This might be caused by a missing cache invalidation before
reading the memory of the output ring
This patch moves the cache invalidation of the output ring from start of
the job to immediately after the notification from hardware where the
output ring will be read.

Signed-off-by: Olaf Baehring <olaf.baehring@draeger.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>

%s/volatge/voltage/g

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Peng Fan <peng.fan@nxp.com>

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass <sjg@chromium.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add SPL variant of DM_RNG so that the DM_RNG can be disabled in SPL
if necessary. This may be necessary due to e.g. size constraints of
the SPL.

Signed-off-by: Marek Vasut <marex@denx.de>

Add a new kconfig option to allow non-secure world access
to the CAAM Job Ring.
This is needed, for example, when running linux without
OP-TEE services, as it's done on Colibri iMX7.

Fixes: 51f1357f3428 ("Revert "drivers/crypto/fsl: assign job-rings to non-TrustZone"")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>