u-boot.git/drivers/dma, branch v2019.07 Unnamed repository; edit this file 'description' to name the repository. CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18T12:15:35+00:00 Trevor Woerner trevor@toganlabs.com 2019-05-03T13:41:00+00:00 1001502545ff0125c39232cf0e7f26d9213ab55f While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com> 
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
dma: ti: k3-udma: Do not touch RT registers before channel configuration 2019-05-03T11:23:17+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2019-04-25T06:38:15+00:00 5487772517817a7e3b501062f3962b56fad34075 Upcoming sysfw (2019.03) will not open the channelized firewalls during init, it only going to do so in response to the channel configuration message. Remove the channel state checks done before the channel configuration and move it after the configuration for warning purposes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> 
Upcoming sysfw (2019.03) will not open the channelized firewalls during
init, it only going to do so in response to the channel configuration
message.

Remove the channel state checks done before the channel configuration and
move it after the configuration for warning purposes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
drivers: dma: ti: k3-udma: Extract packet data only when Meta data is not NULL 2019-05-03T11:23:17+00:00 Keerthy j-keerthy@ti.com 2019-04-24T11:03:54+00:00 a3f25b925fe690be7744d47df0135321e43e2c2a Currently packet data is wrongly extracted when metadata is NULL. Fix it and negate the if check. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> 
Currently packet data is wrongly extracted when metadata is NULL.
Fix it and negate the if check.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mips 2019-04-13T12:27:26+00:00 Tom Rini trini@konsulko.com 2019-04-13T12:27:26+00:00 0a5228be868622894a5f8f226203cd7bac562187 - mt76xx: add USB support, small fixes - ath79: small fixes, add support for QCA9563 SoC and AP152 reference board - mscc: small fixes, add network support for JR2 and ServalT SoCs - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs - MIPS: fix redundant relocation of initrd images 
- mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
- mscc: small fixes, add network support for JR2 and ServalT SoCs
- bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
- MIPS: fix redundant relocation of initrd images
dma: bcm6348: check if driver is enabled before send/recv 2019-04-12T15:32:50+00:00 Álvaro Fernández Rojas noltari@gmail.com 2019-03-22T17:22:31+00:00 e4f907e968a754fd1180c364c90ba2a4a0398d7e This patch prevents errors when running tftpput. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 
This patch prevents errors when running tftpput.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
dma: ti: add driver to K3 UDMA 2019-04-12T00:07:12+00:00 Vignesh R vigneshr@ti.com 2019-02-05T12:01:24+00:00 ffcc66e8fec52d9c8d909f21c627c80596582dca The UDMA-P is intended to perform similar (but significantly upgraded) functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P module supports the transmission and reception of various packet types. The UDMA-P also supports acting as both a UTC and UDMA-C for its internal channels. Channels in the UDMA-P can be configured to be either Packet-Based or Third-Party channels on a channel by channel basis. The initial driver supports: - MEM_TO_MEM (TR mode) - DEV_TO_MEM (Packet mode) - MEM_TO_DEV (Packet mode) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> 
The UDMA-P is intended to perform similar (but significantly upgraded) functions
as the packet-oriented DMA used on previous SoC devices. The UDMA-P module
supports the transmission and reception of various packet types.
The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
channels. Channels in the UDMA-P can be configured to be either Packet-Based or
Third-Party channels on a channel by channel basis.

The initial driver supports:
- MEM_TO_MEM (TR mode)
- DEV_TO_MEM (Packet mode)
- MEM_TO_DEV (Packet mode)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
dma: add bcm6348-iudma support 2018-12-19T14:23:00+00:00 Álvaro Fernández Rojas noltari@gmail.com 2018-12-01T18:00:15+00:00 ccfd69883ab93889ca985c89086381bfc4050b61 BCM6348 IUDMA controller is present on multiple BMIPS (BCM63xx) SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
BCM6348 IUDMA controller is present on multiple BMIPS (BCM63xx) SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
test: dma: add dma-uclass test 2018-12-07T13:13:45+00:00 Grygorii Strashko grygorii.strashko@ti.com 2018-11-28T18:17:51+00:00 b3309918740f00735d414c44ed2a3f26c418715b Add a sandbox DMA driver implementation (provider) and corresponding DM test. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com> 
Add a sandbox DMA driver implementation (provider) and corresponding DM
test.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
dma: add channels support 2018-12-07T13:13:45+00:00 Álvaro Fernández Rojas noltari@gmail.com 2018-11-28T18:17:50+00:00 27ab27f85057801953d65d563f2340a22859bbbe This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
This adds channels support for dma controllers that have multiple channels
which can transfer data to/from different devices (enet, usb...).

DMA channle API:
 dma_get_by_index()
 dma_get_by_name()
 dma_request()
 dma_free()
 dma_enable()
 dma_disable()
 dma_prepare_rcv_buf()
 dma_receive()
 dma_send()

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(),
 add metadata to send/receive ops, add dma_prepare_rcv_buf(),
 minor clean up]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dma: move dma_ops to dma-uclass.h 2018-12-07T13:13:45+00:00 Álvaro Fernández Rojas noltari@gmail.com 2018-11-28T18:17:49+00:00 10b4dc520811fdfc5a31f6067be2b0cd0753998d Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> 
Move dma_ops to a separate header file, following other uclass
implementations. While doing so, this patch also improves dma_ops
documentation.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>