u-boot.git/drivers/fastboot/Kconfig, branch v2022.04

net: fastboot: make UDP port net: configurable

2022-01-15T16:54:21Z

The fastboot protocol uses per default the UDP port 5554. In some cases it might be needed to change the used port. The fastboot utility provides a way to specifiy an other port number to use already. fastboot -s udp:192.168.1.76:1234 boot fastboot.img Signed-off-by: Christian Gmeiner Reviewed-by: Heiko Schocher Reviewed-by: Ramon Fried

Kconfig: Remove all default n/no options

2021-08-31T21:47:49Z

default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini

fastboot: add UUU command UCmd and ACmd support

2021-02-26T14:30:55Z

add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher Acked-by: Patrick Delaunay

fastboot: add command to select the eMMC boot configuration

2021-02-07T18:22:55Z

Add command oem bootbus which executes the command ``mmc bootbus `` on the current fastboot mmc device ( = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus: Signed-off-by: Patrick Delaunay

fastboot: add command to select the default emmc hwpart for boot

2021-02-07T18:22:55Z
Add fastboot command oem partconf which executes the command ``mmc partconf 0`` on the current mmc device to configure the eMMC boot partition with : boot_ack boot_partition, so the command is: $> fastboot oem partconf: The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay [lukma - Kconfig adjustments after merging this patch]

fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2

2021-02-07T18:22:55Z
Update the code and the configs for eMMC boot and userdata partitions acces - FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write) - FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0" - FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1" This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay

fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT

2021-02-07T18:22:55Z
Split userdata and boot partition support for eMMC update and correct the description (update is supported). The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay

Revert "fastboot: Add default fastboot_set_reboot_flag implementation"

2021-02-07T18:22:54Z
This reverts commit 0ebf9842e56c5b8cb7cb1f990bb452cc14af6225. Current generic implementation of fastboot_set_reboot_flag is somewhat messy and requires some additional configuration option to be enabled besides CMD_BCB, so it reverts that implementtion in order to bring a new cleaner one. Next commit introduces new generic implementation of fastboot_set_reboot_flag. Signed-off-by: Roman Kovalivskyi

fastboot: Add default fastboot_set_reboot_flag implementation

2020-09-01T12:47:43Z
Default implementation of fastboot_set_reboot_flag function that depends on "bcb" commands could be used in general case if there are no need to make any platform-specific implementation, otherwise it could be disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG. Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive with some platforms which already have their own implementation of this function. Signed-off-by: Roman Kovalivskyi

fastboot: mt85xx: add command to flash/erase emmc hwpart

2020-01-25T17:04:36Z
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee