It is possible that cpu core may reset before relocation with PSCI reset

Signed-off-by: Peng Fan <peng.fan@nxp.com>

Building U-Boot SPL with CLK_SCMI and SCMI_FIRMWARE Kconfig options
enabled and SPL_FIRMWARE disabled result in the following error.

  drivers/clk/clk_scmi.o: in function `scmi_clk_gate':
  drivers/clk/clk_scmi.c:84: undefined reference to `devm_scmi_process_msg'
  drivers/clk/clk_scmi.c:88: undefined reference to `scmi_to_linux_errno'
  drivers/clk/clk_scmi.o: in function `scmi_clk_get_rate':
  drivers/clk/clk_scmi.c:113: undefined reference to `devm_scmi_process_msg'
  drivers/clk/clk_scmi.c:117: undefined reference to `scmi_to_linux_errno'
  drivers/clk/clk_scmi.o: in function `scmi_clk_set_rate':
  drivers/clk/clk_scmi.c:139: undefined reference to `devm_scmi_process_msg'
  drivers/clk/clk_scmi.c:143: undefined reference to `scmi_to_linux_errno'
  drivers/clk/clk_scmi.o: in function `scmi_clk_probe':
  drivers/clk/clk_scmi.c:157: undefined reference to `devm_scmi_of_get_channel'
  make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
  make: *** [Makefile:2043: spl/u-boot-spl] Error 2

Add Kconfig option so that CLK_SCMI can be disabled in SPL to fix this.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Fix AUTH_BOOT message identifier (s/IMIAGE/IMAGE)

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Acked-by: Andrew Davis <afd@ti.com>

Introduce the bare minimum SD and UART support for the am62a sk.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

In scmi firmware driver, it is better to bind the scmi protocol driver
"scmi_voltage_domain" with the node name of the protocol 17 and not
the sub-node named "regulator", because is a fixed string which doesn't
provide information and because it is not aligned with the other scmi
protocol nodes.

For example on stm32mp135f-dk board with device tree in stm32mp131.dtsi

scmi: scmi {
	compatible = "linaro,scmi-optee";
	#address-cells = <1>;
	#size-cells = <0>;
	linaro,optee-channel-id = <0>;
	shmem = <&scmi_shm>;
	scmi_clk: protocol@14 {
		reg = <0x14>;
		#clock-cells = <1>;
	};
	scmi_reset: protocol@16 {
		reg = <0x16>;
		#reset-cells = <1>;
	};
	scmi_voltd: protocol@17 {
		reg = <0x17>;
		scmi_regu: regulators {
			#address-cells = <1>;
			#size-cells = <0>;
			scmi_reg11: voltd-reg11 {
				reg = <VOLTD_SCMI_REG11>;
				regulator-name = "reg11";
			};
			scmi_reg18: voltd-reg18 {
				reg = <VOLTD_SCMI_REG18>;
				regulator-name = "reg18";
			};
			scmi_usb33: voltd-usb33 {
				reg = <VOLTD_SCMI_USB33>;
				regulator-name = "usb33";
			};
		};
	};
};

Before the patch:

> dm tree

 scmi_agent    0  [ + ]   scmi-over-optee       |-- scmi
 clk           1  [ + ]   scmi_clk              |   |-- protocol@14
 ...
 reset         1  [   ]   scmi_reset_domain     |   |-- protocol@16
 nop           2  [ + ]   scmi_voltage_domain   |   `-- regulators
 regulator     0  [ + ]   scmi_regulator        |       |-- voltd-reg11
 regulator     1  [ + ]   scmi_regulator        |       |-- voltd-reg18
 regulator     2  [ + ]   scmi_regulator        |       |-- voltd-usb33
 ...

after the patch:

> dm tree

 scmi_agent    0  [ + ]   scmi-over-optee       |-- scmi
 clk           1  [ + ]   scmi_clk              |   |-- protocol@14
 ...
 reset         1  [   ]   scmi_reset_domain     |   |-- protocol@16
 nop           2  [ + ]   scmi_voltage_domain   |   `-- protocol@17
 regulator     0  [ + ]   scmi_regulator        |       |-- voltd-reg11
 regulator     1  [ + ]   scmi_regulator        |       |-- voltd-reg18
 regulator     2  [ + ]   scmi_regulator        |       |-- voltd-usb33
 ...

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

When the CCF is activated, the dev->parent is not necessary
the reference to SCMI transport and the function devm_scmi_of_get_channel
failed for the registered SCMI clock, child for protocol@14,
the channel is null and the SCMI clock driver crash for any operations.

This patch changes the first parameter of the ops of_get_channel(),
aligned with other process_msg() to pass directly the good reference,
i.e. parent result of find_scmi_transport_device(dev)
which return the reference of the scmi transport device.

Fixes: 8e96801aa6a ("firmware: scmi: add multi-channel support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

To check dynamic loading of config object, currently APU_0 is used.
Suggestion from pmwfw team is to load OCM_BANK_0 and check for
XST_PM_NO_ACCESS error only to skip future config objects. Other errors
should not be considered for skipping. Change from NODE_APU_0 to
NODE_OCM_BANK_0 and check for XST_PM_NO_ACCESS to skip future config
objects.

Add ":  " to printf statement when there is no permission to load config
object, to align with PMUFW version print.

Update kernel doc for return value for zynqmp_pmufw_load_config_object().

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2784018844ba4afced0e3edff76bdbfe532f517d.1664523444.git.michal.simek@amd.com

This function is also available as ofnode_is_enabled(), so use that
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add compatible string for Versal NET.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ec73f786e1c89094752ff3693f6f0fb4536c85c5.1663589964.git.michal.simek@amd.com

We can check if the message was acknowledged in the common
ti_sci_do_xfer() which lets us remove it from after each call to this
function. This simplifies the code and reduces binary size.

Signed-off-by: Andrew Davis <afd@ti.com>