u-boot.git/drivers/firmware, branch v2023.10

arm_ffa: use debug logs

2023-08-17T16:29:21+00:00

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi 
Cc: Tom Rini 
Cc: Simon Glass 
Reviewed-by: Simon Glass

arm_ffa: introduce armffa command

2023-08-08T14:22:03+00:00

Provide armffa command showcasing the use of the U-Boot FF-A support

armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these  partitions. The command is also
helpful in testing the communication with secure partitions.

For more details please refer to the command documentation [1].

A Sandbox test is provided for the armffa command.

[1]: doc/usage/cmd/armffa.rst

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Ilias Apalodimas 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

arm_ffa: introduce sandbox FF-A support

2023-08-08T14:22:03+00:00

Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Ilias Apalodimas 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

arm_ffa: introduce Arm FF-A support

2023-08-08T14:22:03+00:00

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Reviewed-by: Ilias Apalodimas 
Cc: Tom Rini 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

2023-07-24T23:51:05+00:00

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini

arm_ffa: introduce sandbox FF-A support

2023-07-24T19:30:03+00:00

Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Ilias Apalodimas 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

arm_ffa: introduce armffa command

2023-07-24T19:30:03+00:00

Provide armffa command showcasing the use of the U-Boot FF-A support

armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these  partitions. The command is also
helpful in testing the communication with secure partitions.

For more details please refer to the command documentation [1].

[1]: doc/usage/cmd/armffa.rst

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Ilias Apalodimas 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

arm_ffa: introduce Arm FF-A support

2023-07-24T19:30:03+00:00

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Ilias Apalodimas 
Cc: Jens Wiklander 
Cc: Heinrich Schuchardt

firmware: scmi: return a right errno for SCMI status code

2023-07-14T19:21:07+00:00

scmi_to_linux_errno() is set to return an appropriate errno
which corresponds to a given SCMI status code.
But the current implementation always returns the same value.

Signed-off-by: AKASHI Takahiro

Merge tag 'xilinx-for-v2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

2023-06-12T20:42:37+00:00

Xilinx changes for v2023.10-rc1

global:
- Use proper U-Boot project name

Fix sparse warnings in zynqmp-clk, zynqmp handoff, board

cmd:
- Cover incorrect 0 length entries

Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command

ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes

mmc:
- Sync Versal NET emmc DT binding

pcie:
- Add support for ZynqMP PCIe root port

video:
- Add support for ZynqMP DP

tools:
- Fix debug message in relocate-rela