u-boot.git/drivers/fpga, branch v2018.01

fpga: allow programming fpga from FIT image for all FPGA drivers

2017-12-14T15:09:39+00:00

This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt 
Tested-by: Michal Simek  (On zcu102)
Signed-off-by: Michal Simek

arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes

2017-11-26T01:34:10+00:00

Existing FPGA program write is always assume RBF data >= 32 bytes, so
any rbf data less than 32 bytes writing to FPGA would be failed.
This patch enhances the FPGA program write to support rbf data with
size >= 4 bytes.

Signed-off-by: Tien Fong Chee

fpga: xilinx: Avoid using local intermediate buffer

2017-08-02T07:11:52+00:00

Dont use local temporary buffer for printing out the
info instead use directly from memroy. This fixes the
issue of stack corruprion due to local buffer overflow.

Signed-off-by: Siva Durga Prasad Paladugu 
Signed-off-by: Michal Simek

arm: socfpga: Add FPGA driver support for Arria 10

2017-07-26T08:31:44+00:00

Add FPGA driver support for Arria 10.

Signed-off-by: Tien Fong Chee 
Reviewed-by: Ley Foon Tan 
Reviewed-by: Dinh Nguyen

kconfig: Convert FPGA_SOCFPGA configuration to Kconfig

2017-07-26T08:31:44+00:00

This converts the following to Kconfig:
   CONFIG_FPGA_SOCFPGA

Signed-off-by: Tien Fong Chee 
Reviewed-by: Ley Foon Tan 
Reviewed-by: Dinh Nguyen

arm: socfpga: Restructure FPGA driver in the preparation to support A10

2017-07-26T08:31:44+00:00

Move FPGA driver which is Gen5 specific code into Gen5 driver file
and keeping common FPGA driver intact. All the changes are still keeping
in driver/fpga/ and no functional change. Subsequent patch would move
FPGA manager driver from arch/arm into driver/fpga/.

Signed-off-by: Tien Fong Chee 
Reviewed-by: Ley Foon Tan 
Reviewed-by: Dinh Nguyen

fpga: zynqmppl: Reuse invoke_smc routine

2017-06-20T14:42:13+00:00

Reuse invoke_smc() routine which is already defined
instead of duplicating same at multiple places.

Signed-off-by: Siva Durga Prasad Paladugu 
Signed-off-by: Michal Simek

FPGA: drivers/fpga/ivm_core.c: incorrect printf

2017-04-18T14:29:23+00:00

The number of arguments for printf does not match the
format string.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Tom Rini

fpga: zynqmp: Remove empty functions

2017-01-10T09:18:11+00:00

Xilinx core files will take care about it.
There is no need to have these functions because they do nothing.

Signed-off-by: Michal Simek

arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

2016-12-16T11:57:12+00:00

Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn