u-boot.git/drivers/gpio/Makefile, branch v2025.07

Kbuild: Always use $(PHASE_)

2025-04-11T18:16:44Z

It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our Makefiles as part of the macros to determine when to do something in our Makefiles based on what phase of the build we are in. For consistency, bring this down to a single macro and use "$(PHASE_)" only. Signed-off-by: Tom Rini

gpio: Add support for ADI ADP5588 GPIO expander chips

2025-03-12T16:24:58Z

This adds support for the ADP588 GPIO expander from Analog Devices. It is accessed over I2C and provides up to 18 pins. It is largely a port of the Linux driver developed by Michael Hennerich Signed-off-by: Ian Roberts Signed-off-by: Greg Malysa Signed-off-by: Vasileios Bimpikas Signed-off-by: Utsav Agarwal Signed-off-by: Arturs Artamonovs Signed-off-by: Oliver Gaskell Signed-off-by: Nathan Barrett-Morrison

gpio: Add support for SC5XX-family processor GPIO driver

2025-03-12T16:24:58Z

This adds support for using the GPIO pins on the SC5XX family of SoCs from Analog Devices. Co-developed-by: Nathan Barrett-Morrison Signed-off-by: Nathan Barrett-Morrison Co-developed-by: Ian Roberts Signed-off-by: Ian Roberts Signed-off-by: Vasileios Bimpikas Signed-off-by: Utsav Agarwal Signed-off-by: Arturs Artamonovs Signed-off-by: Oliver Gaskell Signed-off-by: Greg Malysa

gpio: Add Aspeed SGPIO driver

2024-10-29T18:12:04Z

The Aspeed SGPIO driver supports the SGPIO controllers found in the AST2400, AST2500 and AST2600 BMC SoCs. The implementation is a cut-down copy of the upstream Linux kernel driver, adapted for u-boot. Signed-off-by: Billy Tsai

Merge patch series "Tidy up use of 'SPL' and CONFIG_SPL_BUILD"

2024-10-11T18:23:25Z

Simon Glass says: When the SPL build-phase was first created it was designed to solve a particular problem (the need to init SDRAM so that U-Boot proper could be loaded). It has since expanded to become an important part of U-Boot, with three phases now present: TPL, VPL and SPL Due to this history, the term 'SPL' is used to mean both a particular phase (the one before U-Boot proper) and all the non-proper phases. This has become confusing. For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL' phases, not just SPL. So code which can only be compiled for actual SPL, for example, must use something like this: #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) In Makefiles we have similar issues. SPL_ has been used as a variable which expands to either SPL_ or nothing, to chose between options like CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was updated to support 'VPL_' as well. This series starts a change in terminology and usage to resolve the above issues: - The word 'xPL' is used instead of 'SPL' to mean a non-proper build - A new CONFIG_XPL_BUILD define indicates that the current build is an 'xPL' build - The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now defined for TPL and VPL phases - The existing SPL_ Makefile variable is renamed to SPL_ - The existing SPL_TPL Makefile variable is renamed to PHASE_ It should be noted that xpl_phase() can generally be used instead of the above CONFIGs without a code-space or run-time penalty. This series does not attempt to convert all of U-Boot to use this new terminology but it makes a start. In particular, renaming spl.h and common/spl seems like a bridge too far at this point. The series is fully bisectable. It has also been checked to ensure there are no code-size changes on any commit.

global: Rename SPL_TPL_ to PHASE_

2024-10-11T17:44:48Z

Use PHASE_ as the symbol to select a particular XPL build. This means that SPL_TPL_ is no-longer set. Update the comment in bootstage to refer to this symbol, instead of SPL_ Signed-off-by: Simon Glass

global: Rename SPL_ to XPL_

2024-10-11T17:44:48Z

Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is no-longer set. Signed-off-by: Simon Glass

drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48Z

Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass

gpio: adp5585: Add SPL config for ADP5585 driver

2024-10-04T12:14:29Z

So we can disable to build ADP5585 in SPL to save size Signed-off-by: Ye Li Signed-off-by: Alice Guo Reviewed-by: Peng Fan Reviewed-by: Fabio Estevam

gpio: Add G7 Aspeed gpio controller driver

2024-08-28T00:01:38Z

In the 7th generation of the SoC from Aspeed, the control logic of the GPIO controller has been updated to support per-pin control. Each pin now has its own 32-bit register, allowing for individual control of the pin’s value, direction, interrupt type, and other settings. Signed-off-by: Billy Tsai