u-boot.git/drivers/gpio, branch v2010.03 Unnamed repository; edit this file 'description' to name the repository. add a new AT91 GPIO driver 2010-02-12T18:31:54+00:00 Jens Scharsig js_at_ng@scharsoft.de 2010-02-03T21:46:16+00:00 ea8fbba73184a40437bdeccd888cf448d5f1105e * add a real AT91 GPIO driver instead of header inline code * resolve the mixing of port and pins * change board config files to use new driver * add macros to gpio to realize backward compatibility Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> 
* add a real AT91 GPIO driver instead of header inline code
* resolve the mixing of port and pins
* change board config files to use new driver
* add macros to gpio to realize backward compatibility

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Kirkwood: Upgated licencing for files imported from linux source to GPLv2 or later 2010-01-23T14:15:48+00:00 Prafulla Wadaskar prafulla@marvell.com 2009-12-23T21:25:23+00:00 beca04dd2446fc9ec46ca17163dadb7f82420e7c These are few files directly imported from Linux kernel source. Those are not modifyed at all ar per strategy. These files contains source with GPLv2 only whereas u-boot expects GPLv2 or latter These files are updated for the same from prior permission from original writes Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> 
These are few files directly imported from Linux kernel source.
Those are not modifyed at all ar per strategy.
These files contains source with GPLv2 only
whereas u-boot expects GPLv2 or latter

These files are updated for the same from prior permission from original writes

Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Kirkwood: add Marvell Kirkwood gpio driver 2009-07-22T22:19:28+00:00 Dieter Kiermaier dk-arm-linux@gmx.de 2009-06-29T12:45:08+00:00 ec16441085f471c03a8c0909579463e31e5b947a Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de> 
Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
General help message cleanup 2009-06-12T18:47:16+00:00 Wolfgang Denk wd@denx.de 2009-05-24T15:06:54+00:00 a89c33db96a1e55319a286dd4c3c05ca64ac6bfd Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de> 
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
i.MX31: add a simple gpio driver 2009-02-24T08:43:10+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-07T00:18:07+00:00 b30de3cccf8867566cd314e7c7033904afa5dc9d This is a minimal driver, so far only managing output. It will be used by the mxc_spi.c driver. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Command usage cleanup 2009-01-28T07:49:52+00:00 Peter Tyser ptyser@xes-inc.com 2009-01-28T00:03:12+00:00 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8 Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Standardize command usage messages with cmd_usage() 2009-01-28T07:43:45+00:00 Peter Tyser ptyser@xes-inc.com 2009-01-28T00:03:10+00:00 62c3ae7c6ef215b1afa614abdf61acf077752207 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Add support for PCA953x I2C gpio devices 2008-12-20T00:11:49+00:00 Peter Tyser ptyser@xes-inc.com 2008-12-17T22:36:21+00:00 e92739d34e2d6b6aca93b2598248210710897ce8 Initial support for NXP's 4 and 8 bit I2C gpio expanders (eg pca9537, pca9557, etc). The CONFIG_PCA953X define enables support for the devices while the CONFIG_CMD_PCA953X define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO define enables an 'info' sub-command which provides summary information for the given pca953x device. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Initial support for NXP's 4 and 8 bit I2C gpio expanders
(eg pca9537, pca9557, etc). The CONFIG_PCA953X define
enables support for the devices while the CONFIG_CMD_PCA953X
define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
define enables an 'info' sub-command which provides summary
information for the given pca953x device.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>