u-boot.git/drivers/gpio, branch v2012.10-rc2 Unnamed repository; edit this file 'description' to name the repository. Tegra: Change Tegra20 to Tegra in common code, prep for T30 2012-09-10T20:01:24+00:00 Tom Warren twarren@nvidia.com 2012-09-05T00:00:24+00:00 29f3e3f24832fccdd7ce5fa961bc4d4005b07381 Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> 
Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate.
Convert tegra20_ source file and function names to tegra_, also.

Upcoming Tegra30 port will use common code/defines/names where possible.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
gpio: add gpio api support to mx27 (v4) 2012-09-01T12:58:29+00:00 trem tremyfr@yahoo.fr 2012-08-25T05:30:33+00:00 e71c39def6a00ba3dee9a554ea85a8a5bd3dd300 The gpio api has been tested on an armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de> 
The gpio api has been tested on an armadeus apf27.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Acked-by: Stefano Babic <sbabic@denx.de>
mxc: Make gpio_get_value() use PSR 2012-09-01T12:58:28+00:00 Benoît Thébaudeau benoit.thebaudeau@advansee.com 2012-08-20T10:55:41+00:00 5dafa4543c399d329c7b01df1afa98437861cac0 gpio_get_value() should use PSR like Linux, not DR, because DR does not always reflect the pin state, while PSR does. This is especially useful to detect a short circuit on a GPIO pin configured as output, or to read the level of a pin controlled by a non-GPIO IOMUX function. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> 
gpio_get_value() should use PSR like Linux, not DR, because DR does not always
reflect the pin state, while PSR does. This is especially useful to detect a
short circuit on a GPIO pin configured as output, or to read the level of a pin
controlled by a non-GPIO IOMUX function.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
tegra20: rename tegra2 -> tegra20 2012-09-01T12:58:21+00:00 Allen Martin amartin@nvidia.com 2012-08-31T08:30:00+00:00 00a2749d7be5b0e6cb6435187ec8fea600b44627 This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
ARM: add basic support for the Broadcom BCM2835 SoC 2012-09-01T12:58:21+00:00 Stephen Warren swarren@wwwdotorg.org 2012-08-05T16:07:21+00:00 efad6cf8818620b0d85405df2b810760b62acbb8 This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 
This SoC is used in the Raspberry Pi, for example.

For more details, see:
http://www.broadcom.com/products/BCM2835
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf.

Initial support is enough to boot to a serial console, execute a minimal
set of U-Boot commands, download data over a serial port, and boot a
Linux kernel. No storage or network drivers are implemented.

GPIO driver originally by Vikram Narayanan <vikram186@gmail.com>
with many fixes from myself.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
snowball: Add support for ux500 based snowball board 2012-09-01T12:58:19+00:00 Mathieu J. Poirier mathieu.poirier@linaro.org 2012-08-03T11:05:12+00:00 84dee301c30d728f97c85f795661804980fb0c77 Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefile 
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Conflicts:

	drivers/gpio/Makefile
mxs: prefix register acessor macros with 'mxs' prefix 2012-09-01T12:58:17+00:00 Otavio Salvador otavio@ossystems.com.br 2012-08-05T09:05:30+00:00 ddcf13b15231ee2dca99285349b143c365ce5173 As the register accessing mode is the same for all i.MXS SoCs we ought to use 'mxs' prefix intead of 'mx28'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> 
As the register accessing mode is the same for all i.MXS SoCs we ought
to use 'mxs' prefix intead of 'mx28'.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
dm: Move OMAP GPIO driver to drivers/gpio/ 2012-09-01T12:58:13+00:00 Marek Vasut marex@denx.de 2012-07-21T05:02:23+00:00 308252adaf090335fcc0c8bc8b49668f9d98022f Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: U-Boot DM <u-boot-dm@lists.denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
sh: Add support pin function control using GPIO 2012-08-08T01:24:41+00:00 Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com 2012-06-21T02:26:38+00:00 d764c5043d6d72e012f3e50092344ebd57a0c242 Renesas SH and R-Mobile set up device using PFC. This provide the framework. Most codes were brought from linux kernel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 
Renesas SH and R-Mobile set up device using PFC.
This provide the framework. Most codes were brought from linux kernel.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
GPIO: Add SPEAr GPIO driver 2012-07-07T12:07:42+00:00 Stefan Roese sr@denx.de 2012-02-14T13:01:36+00:00 2cb06a4fda4e7a88c734adaec9eeb5059e50f76b Tested on x600 (SPEAr600). Signed-off-by: Stefan Roese <sr@denx.de> 
Tested on x600 (SPEAr600).

Signed-off-by: Stefan Roese <sr@denx.de>