u-boot.git/drivers/gpio, branch v2016.05-rc1

gpio: Add support for Qualcomm PM8916 gpios

2016-04-01T21:18:13Z

This driver supports GPIOs present on PM8916 PMIC. There are 2 device drivers inside: - GPIO driver (4 "generic" GPIOs) - Keypad driver that presents itself as GPIO with 2 inputs (power and reset) Signed-off-by: Mateusz Kulikowski Reviewed-by: Simon Glass Tested-by: Simon Glass

gpio: Add support for Qualcomm gpio controller

2016-04-01T21:18:07Z

Add support for gpio controllers on Qualcomm Snapdragon devices. This devices are usually called Top Level Mode Multiplexing in Qualcomm documentation. Signed-off-by: Mateusz Kulikowski Reviewed-by: Simon Glass Tested-by: Simon Glass

Merge branch 'master' of http://git.denx.de/u-boot-sunxi

2016-04-01T12:17:55Z

gpio: uniphier: use devm_get_addr() to get base address

2016-03-31T15:17:19Z

Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada

sunxi: axp: Generalize register macros for VBUS drive GPIO

2016-03-31T15:03:52Z

VBUS drive is supported on AXP221 and later PMICs. Rework the macros so we can support this on later PMICs without too much work. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

Merge git://www.denx.de/git/u-boot-marvell

2016-03-25T16:57:18Z

gpio: Add DM GPIO driver for Marvell MVEBU

2016-03-24T08:44:39Z

This patch adds a DM GPIO driver for the Marvell MVEBU SoCs. There are other non-DM drivers that might be used on these platforms. But this patch creates a new DM driver. Which will be used by all Armada XP/38x boards. Other MVEBU SoC (Kirkwood / Orion) may follow once they support DM as well. Signed-off-by: Stefan Roese Cc: Dirk Eibach Cc: Phil Sutter Cc: Kevin Smith Cc: Luka Perkov Cc: Tom Rini Reviewed-by: Kevin Smith Tested-by: Kevin Smith Signed-off-by: Stefan Roese

sunxi: Add a bunch of missing compatible strings to sunxi_gpio.c

2016-03-23T21:04:13Z

The kernel has different compatible strings for the pio block because the pin-muxing is different on all the different SoCs, but sunxi_gpio.c only support the basic gpio functionality, which is identical everywhere. Add the missing compatible strings for various SoC models. Signed-off-by: Hans de Goede Acked-by: Ian Campbell

x86: broadwell: Add a GPIO driver

2016-03-17T02:27:26Z

Add a GPIO driver for the GPIO peripheral found on broadwell devices. Signed-off-by: Simon Glass Acked-by: Bin Meng

x86: Drop all the old pin configuration code

2016-03-17T02:27:25Z

We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass Reviewed-by: Bin Meng