u-boot.git/drivers/hwmon/lm63.c, branch master Unnamed repository; edit this file 'description' to name the repository. Drop digital thermometer and thermostat (DTT) drivers 2017-05-22T12:37:11+00:00 Simon Glass sjg@chromium.org 2017-05-17T09:25:05+00:00 853eaa4f301c15584f3664f1be000921810d7825 This subsystem is quite old. It has been replaced with a driver-model version (UCLASS_THERMAL). Boards are free to convert to that if required, but here is a removal patch that could be applied in the meantime. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> 
This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,
but here is a removal patch that could be applied in the meantime.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24T13:44:38+00:00 Wolfgang Denk wd@denx.de 2013-07-08T07:37:19+00:00 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
hwmon: lm63: Use ARRAY_SIZE at appropriate place 2013-06-26T14:26:06+00:00 Axel Lin axel.lin@ingics.com 2013-06-22T16:55:14+00:00 b98bfeb6674bd33effe9e093f071e7eeb3174f2e Signed-off-by: Axel Lin <axel.lin@ingics.com> 
Signed-off-by: Axel Lin <axel.lin@ingics.com>
hwmon: do not init sensors on startup 2011-08-04T21:30:38+00:00 Heiko Schocher hs@denx.de 2011-08-01T04:01:43+00:00 780f13a9e1a21098c6255aaa1c46ed80aa7a436c The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Holger Brunck <holger.brunck@keymile.com> 
The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>
hwmon: Extend lm63.c to support LM64 2011-05-12T21:01:34+00:00 Dirk Eibach eibach@gdsys.de 2011-04-18T08:43:14+00:00 31c1bdd93d0c7a6f2c242573761724f75e2647bc This patch adds support for the National LM64 temperature sensor with integrated fan control to lm63.c. Main difference between LM63 and LM64 is 16°C offset in sensor readings. Signed-off-by: Dirk Eibach <eibach@gdsys.de> 
This patch adds support for the National LM64 temperature
sensor with integrated fan control to lm63.c.
Main difference between LM63 and LM64 is 16°C offset in sensor
readings.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
hwmon: Add LM63 support 2008-10-18T19:54:01+00:00 Dirk Eibach eibach@gdsys.de 2008-10-08T11:44:27+00:00 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b This patch adds support for the National LM63 temperature sensor with integrated fan control. It's used on the GDSys Neo board (405EP) which will be submitted later. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Stefan Roese <sr@denx.de> 
This patch adds support for the National LM63 temperature
sensor with integrated fan control. It's used on the GDSys
Neo board (405EP) which will be submitted later.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Stefan Roese <sr@denx.de>