u-boot.git/drivers/hwmon, branch v2008.10Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/hwmon?h=v2008.102008-10-14T12:39:56ZRemove CFG_EEPROM_PAGE* dependencies for temperature sensors2008-10-14T12:39:56ZPeter Tyserptyser@xes-inc.com2008-09-23T17:38:42Zurn:sha1:81e612014c40c922ec35488d17c504d4e9286f06
The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
CFG_EEPROM_PAGE_WRITE_BITS in various temperature
sensor drivers are not necessary
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR2008-09-10T09:08:45ZVictor Gallardovgallardo@amcc.com2008-09-09T22:13:29Zurn:sha1:9ebbb54f7a25055010fa6668eba40c72a4c4f985
On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
and glacier.
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Minor code cleanup: keep lists sorted.2008-08-18T21:50:20ZWolfgang Denkwd@denx.de2008-08-18T21:50:20Zurn:sha1:b734e5556a239b3be5f9693b2f4b4b739683ec16
Signed-off-by: Wolfgang Denk <wd@denx.de>
Add support for ADT7460 I2C monitor chip2008-08-18T21:47:01ZRicardo Ribalda Delgadoricardo.ribalda@uam.es2008-07-23T17:10:14Zurn:sha1:d0039d4ed275e6ca09fb417895024ad02be118c4
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS17222008-07-13T13:35:02ZMichal Simekmonstr@monstr.eu2008-07-11T13:11:57Zurn:sha1:18c8a28aad49803780bd8d52432ded528e37e701
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
hwmon: Cleaning hwmon devices2008-07-13T13:26:18ZMichal Simekmonstr@monstr.eu2008-07-11T09:50:53Zurn:sha1:6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
DTT: Issue one-shot command on AD7414 (LM75 code) to read temp2008-06-03T19:00:00ZStefan Roesesr@denx.de2008-05-16T09:06:06Zurn:sha1:4d91d1df2f16b511ab80dec50c80e050ba0d841e
On AD7414 the first value upon bootup is not read correctly.
This is most likely because of the 800ms update time of the
temp register in normal update mode. To get current values
each time we issue the "dtt" command including upon powerup
we switch into one-short mode.
This patch fixes the problem on AD7414 equipped boards (Sequoia,
Canyonlands etc), that temp value printed in the bootup log was
incorrect.
Signed-off-by: Stefan Roese <sr@denx.de>
LM73 bug fix for negative temperatures and cleanup2008-04-13T15:58:36ZLarry Johnsonlrj@acm.org2008-02-21T18:58:11Zurn:sha1:7754f33c6fb7a2c050388d20bf3847038558bdcf
When the LM73 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
512 C too high. This patch fixes the problem, and does general cleanup
of the code.
Signed-off-by: Larry Johnson <lrj@acm.org>
LM75 bug fix for negative temperatures2008-02-22T15:33:09ZLarry Johnsonlrj@acm.org2008-02-21T18:58:16Zurn:sha1:d01b847c5cd070895c4ba178c85cd068a95cf7cd
When the LM75 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
256 C too high. This patch fixes the problem.
Signed-off-by: Larry Johnson <lrj@acm.org>
Remove superfluous preprocessor conditionals from LM73 driver2008-01-11T23:26:47ZLarry Johnsonlrj@acm.org2008-01-09T17:42:35Zurn:sha1:92fa37eac530860643afa26ae347af3d23d67309
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
(2) Use conditional Makefile.o.
Signed-off-by: Larry Johnson <lrj@acm.org>