u-boot.git/drivers/i2c/Kconfig, branch v2017.05

i2c: Set default I2C bus number

2017-03-28T04:27:54Z

This patch allows using i2c commands (e.g. "i2c probe", "i2c md", etc) without the need to first select the bus number with e.g. "i2c dev 0". This is the "i2c" command behavior similar to the one from pre DM, where by default bus 0 was immediately accessible. Signed-off-by: Lukasz Majewski

i2c: lpi2c: add lpi2c driver for i.MX7ULP

2017-03-17T08:27:08Z

Add lpi2c driver for i.MX7ULP. Need to enable the two options to use this driver: CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y Signed-off-by: Peng Fan Acked-by: Heiko Schocher Cc: Stefano Babic

i2c: sandbox: remove code snippet from Kconfig help

2017-02-13T12:18:25Z

With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher Signed-off-by: Masahiro Yamada

i2c: Kconfig: Add SYS_I2C_S3C24X0 entry

2017-01-18T04:25:56Z

Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung Signed-off-by: Minkyu Kang

i2c: Kconfig: Add SYS_I2C_MXC entry

2016-12-16T16:15:27Z

Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic Cc: Heiko Schocher Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki

Merge branch 'master' of git://git.denx.de/u-boot-atmel

2016-08-15T21:31:23Z

i2c: atmel: add i2c driver

2016-08-15T20:12:00Z

Add i2c driver. Signed-off-by: Songjun Wu Reviewed-by: Heiko Schocher Acked-by: Heiko Schocher

i2c: add Tegra186 BPMP driver

2016-08-15T17:26:13Z

On Tegra186, some I2C controllers are directly controlled by the main CPU, whereas others are controlled by the BPMP, and can only be accessed by the main CPU via IPC requests to the BPMP. This driver covers the latter case. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Reviewed-by: Heiko Schocher Signed-off-by: Tom Warren

i2c: mvtwsi: Add compatibility to DM

2016-07-26T08:20:13Z

This patch adds the necessary functions and Kconfig entry to make the MVTWSI I2C driver compatible with the driver model. A possible device tree entry might look like this: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; clock-frequency = <100000>; u-boot,i2c-slave-addr = <0x0>; }; Signed-off-by: Mario Six Reviewed-by: Stefan Roese

i2c: Select SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED for SPEAr

2016-05-17T06:29:00Z

The DW I2C controller in the SPEAr SoCs doesn't support the enable status register check. This patch selects SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED for these boards. Signed-off-by: Stefan Roese Cc: Heiko Schocher