u-boot.git/drivers/i2c/Kconfig, branch v2020.10

xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers

2020-08-20T07:46:55Z

Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek Reviewed-by: Heiko Schocher

i2c: add nexell driver

2020-07-29T12:43:40Z

Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch

i2c: i2c-cortina: added CAxxxx I2C support

2020-07-09T04:02:44Z

Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li Signed-off-by: Alex Nemirovsky CC: Heiko Schocher Reviewed-by: Heiko Schocher hs: fixed build error, add include log.h

i2c: octeon_i2c: Add I2C controller driver for Octeon

2020-07-09T04:02:44Z

Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams Signed-off-by: Suneel Garapati Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Simon Glass Cc: Daniel Schwierzeck Cc: Aaron Williams Cc: Chandrakala Chavva Reviewed-by: Simon Glass Reviewed-by: Heiko Schocher Reviewed-by: Rayagonda Kokatanur

rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA

2020-05-15T18:47:35Z

Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner

drivers: i2c: add brcm iproc I2C driver support

2020-04-20T04:52:28Z

Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi Signed-off-by: Rayagonda Kokatanur Signed-off-by: Sheetal Tigadoli Signed-off-by: Vladimir Olovyannikov Reviewed-by: Heiko Schocher

i2c: remove i2c driver-model compatibility layer

2019-07-29T21:58:52Z

There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski Acked-by: Heiko Schocher

i2c: omap24xx_i2c: Adapt driver to support K3 devices

2019-07-17T15:12:54Z

K3 devices have I2C IP that is same as OMAP2+ family. Allow driver to be compiled for ARCH_K3. Signed-off-by: Vignesh R Signed-off-by: Andreas Dannenberg Reviewed-by: Heiko Schocher Reviewed-by: Lokesh Vutla

i2c: mxc: Hide kconfig based control in DM_I2C mode

2019-05-17T03:35:24Z

These options only apply when not using DM_I2C. When using device trees, the dt will enable and control the speeds of the I2C controller(s) and these configuration options have no effect. So disable them in DM_I2C mode. Otherwise they show up as decoys, and make it look like one is enabling I2C controllers and setting the speed when really it's doing nothing. However, a system using a SPL build will not use DM_I2C in the SPL, even if DM_I2C is enabled for the main u-boot. And so the SPL might use the kconfig based I2C speed controls while the main u-boot does not. Cc: Sriram Dash Cc: Priyanka Jain Cc: Heiko Schocher Signed-off-by: Trent Piepho

Kconfig: tegra: Migrate SYS_I2C_TEGRA

2019-02-20T16:01:44Z

Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson Cc: Tom Warren Cc: Stephen Warren Cc: Heiko Schocher Cc: Marcel Ziswiler Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach Cc: Stefan Agner Cc: Alban Bedel Cc: Allen Martin Signed-off-by: Tom Warren