u-boot.git/drivers/i2c, branch v2021.04

Merge tag 'xilinx-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

2021-02-23T15:45:55Z

Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name

i2c: i2c_cdns: Enable i2c clock

2021-02-23T13:56:59Z

Enable i2c controller clock from driver probe function by calling clk_enable(). Signed-off-by: T Karthik Reddy Signed-off-by: Michal Simek Reviewed-by: Heiko Schocher

dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO

2021-02-21T05:08:00Z

Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Signed-off-by: Igor Opaniuk Reviewed-by: Tom Rini Reviewed-by: Priyanka Jain

dm: i2c: allow disabling driver model in SPL

2021-02-21T05:07:30Z

At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass Reviewed-by: Heiko Schocher Signed-off-by: Igor Opaniuk Reviewed-by: Tom Rini

i2c: at91: fix crash when using 'i2c probe'

2021-02-21T05:05:08Z

When issuing 'i2c probe', the driver was crashing, because at probe there is a request with zero length buffer to write to i2c bus. The xfer_msg function assumes the buffer is always there, and never checks for the buffer length. => i2c dev 0 Setting bus to 0 => i2c probe Valid chip addresses: data abort pc : [<7ffa97dc>] lr : [<7ffa96f8>] reloc pc : [<66f277dc>] lr : [<66f276f8>] sp : 7fb7c110 ip : 7ff87a28 fp : 7ff99938 r10: 00000002 r9 : 7fb7dec0 r8 : 00000000 r7 : e181c600 r6 : 7fb88c20 r5 : 00000000 r4 : 7fb7c128 r3 : 00000000 r2 : 00000001 r1 : 00000000 r0 : 00000009 Flags: nZCv IRQs off FIQs off Mode SVC_32 Code: eb0092f4 e1a00005 e8bd81f0 e594300c (e5d33000) Resetting CPU ... Fixes: 8800e0fa20 ("i2c: atmel: add i2c driver") Signed-off-by: Eugen Hristev

i2c: i2c-gpio: Fix GPIO output

2021-02-21T05:04:49Z

The dm_gpio_set_dir_flags function cannot be used to update the configuration of a GPIO pin because it does a bitwise OR with the existing flags. Looks like commit 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags") has introduced this behaviour and the i2c-gpio driver has been broken since. Signed-off-by: Harm Berntsen CC: Heiko Schocher CC: Patrick Delaunay

Merge branch '2021-02-02-drop-asm_global_data-when-unused'

2021-02-15T15:16:45Z

- Merge the patch to take out of

arm: Remove ls2080a_simu board

2021-02-15T15:11:38Z

This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

sandbox: Disable I2C emulators in SPL

2021-01-30T21:25:41Z

These cannot work with of-platdata since they currently need the devicetree at runtime. Disable the emulators and the sandbox I2C driver that needs them. We can enable these later, if needed for testing. Switch the of_plat_parent test over to use a simple bus instead. Signed-off-by: Simon Glass Reviewed-by: Heiko Schocher