u-boot.git/drivers/i2c, branch v2024.10-rc2

arm: ti: Remove omap4 platform support

2024-07-23T16:37:48Z

There are no longer any OMAP4 platforms in U-Boot, remove the related functionality. Signed-off-by: Tom Rini

drivers: i2c: Remove duplicate newlines

2024-07-22T16:53:05Z

Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut Reviewed-by: Heiko Schocher

i2c: mediatek: add support for optional arb and pmic clock

2024-07-08T17:45:50Z

Add support for optional arb and pmic clock for i2c provided in upstream linux DTSI. Signed-off-by: Christian Marangi Reviewed-by: Heiko Schocher

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

i2c: Remove and add needed includes

2024-05-07T14:00:55Z

Remove from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher Signed-off-by: Tom Rini

i2c: Add support for Qualcomm Generic Interface (GENI) I2C controller

2024-04-23T11:29:32Z

Add Support for the Qualcomm Generic Interface (GENI) I2C interface found on newer Qualcomm SoCs. The Generic Interface (GENI) is a firmware based Qualcomm Universal Peripherals (QUP) Serial Engine (SE) Wrapper which can support multiple bus protocols depending on the firmware type loaded at early boot time based on system configuration. It also supports the "I2C Master Hub" which is a single function Wrapper that only FIFO mode I2C. It replaces the fixed-function QUP Wrapper found on older SoCs. The geni-se.h containing the generic GENI Serial Engine registers defines is imported from Linux. Only FIFO mode is implemented, neither SE DMA nor GPI DMA are implemented. Signed-off-by: Neil Armstrong Signed-off-by: Caleb Connolly

Merge patch series "ARM: renesas: Rename R-Mobile to Renesas"

2024-03-02T19:30:25Z

Marek Vasut says: Rename R-Mobile to Renesas all over the place because the chips are made by Renesas, while only a subset of them is from the R-Mobile line.

ARM: renesas: Rename ARCH_RMOBILE to ARCH_RENESAS

2024-03-02T19:29:36Z

Rename ARCH_RMOBILE to ARCH_RENESAS because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l 'ARCH_RMOBILE' | xargs -I {} sed -i 's@ARCH_RMOBILE@ARCH_RENESAS@g' {} " Signed-off-by: Marek Vasut Reviewed-by: Paul Barker

i2c: rzg2l: Add I2C driver for RZ/G2L family

2024-02-28T17:42:27Z

This driver supports the I2C module on the Renesas RZ/G2L (R9A07G044) SoC, also known as the RIIC module. This patch is based on both the u-boot driver in the Renesas RZ BSP 3.0.5 release [1] (commit 7fcc1fdc2534), and the Linux v6.7 driver (commit 0dd3ee311255). Support for deblocking the I2C bus is included as this may be needed after triggering a reset via the Power Management IC (PMIC) over I2C (the PMIC asserts the reset line before the SoC completes the I2C write transaction with obvious bus locking effects). If the SDA line is observed to be low during initialisation, we automatically attempt to deblock. [1]: https://github.com/renesas-rz/renesas-u-boot-cip Signed-off-by: Paul Barker Reviewed-by: Marek Vasut