u-boot.git/drivers/led/Kconfig, branch v2017.09Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/led/Kconfig?h=v2017.092017-05-10T14:16:09Zdm: led: add BCM6358 led driver2017-05-10T14:16:09ZÁlvaro Fernández Rojasnoltari@gmail.com2017-05-07T18:11:30Zurn:sha1:632889cfe5205b68b2d0fc597011adb051bd938b
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: add BCM6328 led driver2017-05-10T14:16:09ZÁlvaro Fernández Rojasnoltari@gmail.com2017-05-07T18:10:24Zurn:sha1:28300dc5263b26365d8210b92d8acf097dc5e942
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c,
simplified to remove HW leds and blink fallbacks.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: Add support for blinking LEDs2017-04-15T01:38:57ZSimon Glasssjg@chromium.org2017-04-10T17:34:57Zurn:sha1:53378dac8dc33e3fd5f07d60bd7a5f8258ac7a20
Allow LEDs to be blinked if the driver supports it. Enable this for
sandbox so that the tests run.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
dm: led: Add a missing blank line in the Kconfig file2017-04-15T01:38:57ZSimon Glasssjg@chromium.org2017-04-10T17:34:52Zurn:sha1:9b36f748162e3d09b16df5b7c670d183292ecdc1
There should be a blank line between each option. Add one before LED_GPIO.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
status_led: Kconfig migration - introduction2017-01-21T20:12:33ZUri Mashiachuri.mashiach@compulab.co.il2017-01-19T08:51:05Zurn:sha1:79267edd10fde0815c382157b9cb280166637fac
Move all of the status LED feature to drivers/led/Kconfig.
doc/README.LED updated to reflect the Kconfig implementation.
Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
dm: led: Tidy up SPL options for the led and led-gpio2015-09-03T03:28:22ZSimon Glasssjg@chromium.org2015-08-30T22:55:14Zurn:sha1:6a436c9182a90551739a5b7b3f44254234056915
At present SPL does not have its own option. But these features can
increase SPL code size. Adjust the Kconfig and Makefile so that
separate a SPL option can be selected.
Signed-off-by: Simon Glass <sjg@chromium.org>
led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED2015-08-18T17:46:03ZMasahiro Yamadayamada.masahiro@socionext.com2015-08-11T22:31:50Zurn:sha1:f0cd2454488fcceacc89bd1214e8a54ff581c2ba
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
drivers: hierarchize drivers Kconfig menu2015-08-13T00:47:44ZMasahiro Yamadayamada.masahiro@socionext.com2015-07-25T17:46:26Zurn:sha1:0b11dbf705ee294ac5a9fe1aeda7b7f5537a8d72
The menuconfig for drivers are getting more and more cluttered
and unreadable because too many entries are displayed in a single
flat menu. Use hierarchic menu for each category.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Update to apply again in a few places, drop USB hunk]
Signed-off-by: Tom Rini <trini@konsulko.com>
dm: led: Add a driver for GPIO-controlled LEDs2015-07-21T23:39:24ZSimon Glasssjg@chromium.org2015-06-23T21:38:46Zurn:sha1:5ac76bad2277ed40f2a2112ffab0f156e3b599fb
Add a simple driver which allows use of LEDs attached to GPIOs. The linux
device tree binding is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
dm: Add support for LEDs2015-07-21T23:39:24ZSimon Glasssjg@chromium.org2015-06-23T21:38:45Zurn:sha1:5917112c9e9f7a60062c604b3224bd5713c41f46
Add a simple uclass for LEDs, so that these can be controlled by the device
tree and activated when needed. LEDs are referred to by their label.
This implementation requires a driver for each type of LED (e.g GPIO, I2C).
Signed-off-by: Simon Glass <sjg@chromium.org>